Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
We need to perform heating control. With ON/OFF control, we need to increase the temperature of a 30°C oven to 100 °C. What settings are necessary?
Answer
Set direct/reverse operation to reverse operation.
(The factory default is for reverse operation.)
When you set the temperature (e.g., to 100 °C), the control output will turn ON when the temperature is below the set temperature and will turn OFF when it's above the set temperature.
If the temperature falls below the set temperature again, the output will turn ON again.
The point at which the output turns ON is also affected by the hysteresis setting.
Applicable Models: All Omron's Temperature Controllers
K3HB-X
FAQ
Top of page