Primary Contents

• When can the manual reset be used for E5[]N/E5[]K Temperature Controllers?
• How can ON/OFF control be used to maintain the temperature at 30 degree C?
• What is "Hysteresis"?
• What is "Self-tuning (ST)"?
• We need to perform heating control. With ON/OFF control, we need to increase the temperature of a 30°C oven to 100 °C. What settings are necessary?
• Please tell me of any precautions for extending the lead wires of a Temperature Sensor.
• How do I change the displayed temperature if the displayed temperature is different from the actual temperature on the E5CS?
• There seems to be a large error in the temperature of the Temperature Controller. Why is this?
• What is "PID Control"?
• What is "Hunting" and "Overshooting"?
• Can Temperature Controllers with a heater burnout alarm detect heater burnouts when using thyristor control?
• What's the difference between a Pt100 and JPt100 resistance thermometer?
• What is ON/OFF Operation?
• What is the Controller's "direct/reverse operation" and how is it set on the E5[]N?
• What is "Two PID Control"?
• What is "Thermocouple"?
• What is P Action?
• Can current outputs (4 to 20 mA DC) be used for the heating and cooling outputs of E5[]K Digital Controllers?
• We need to start a fan when the temperature rises and stop it when the temperature drops.
• What is "Heating and Cooling Control"?
• Does E53-S Solid-state Relays Output Unit have a zero cross function?
• What are the types and characteristics of temperature sensors for Controllers?
• What is "Auto-tuning"?
• Can manual operation be used when the temperature controllers are in ON/OFF control mode?
• What wiring should be used between a Temperature Controller and the G3PX Power Controllers?
• Why does E5[]N Basic-type Digital Temperature Controllers overshoot or undershoot?
• Why doesn't the temperature of E5[]N Basic-type Digital Temperature Controllers rise or fall?
• What happens if the Temperature Sensor terminals are connected with the wrong polarity?
• What happens when the Controllers are in STOP mode before control is started?
• What happens if the thermocouple lead wires or compensating lead wires are too long?
• What happens to the control output when the Sensor of E5C2 Temperature Controllers fails?
• What is a substitute product for E5C4 Digital Temperature Controllers with digital settings and a digital display?
• What should I use to extend the lead wires of the platinum resistance thermometer?
• What Controllers can be used with ES2-THB Temperature/Humidity Sensors?
• How do I wire ES2-HB Humidity Sensors and Controllers?
• How do I wire ES2-THB Temperature/Humidity Sensors and Controllers?
• What power supply should be used for ES2-THB Temperature/Humidity Sensors and ES2-HB Humidity Sensors?
• Can ES1B Infrared Thermosensors measure the temperature difference between two locations?