Item list of M22N
| Item | Appearance | Classification | Model | Remarks | |
|---|---|---|---|---|---|
| Protective Cover |  |
--- | A22NZ-A-303 | A protector designed to prevent
incorrect operation. Cannot be used together with other accessories. (Rubber seal included.) For exclusive use with panel cutouts of 22.3 and 25.5 mm dia. Key-type selector switches cannot be used. |
|
| Plastic Hole Plug * |  |
Round | A22NZ-A-401 | Can be plugged into precut panel
holes for future expansion. Applicable panel thickness: 0.8 to 3.0 mm |
|
| Metal Hole Plug * |  |
Round | A22NZ-A-402 | Can be plugged into precut panel
holes for future expansion. Applicable panel thickness: 0.8 to 6.0 mm (Rubber seal included.) |
|
| Lock Ring * |  |
Round | A22NZ-A-403 | Used when a more secure lock is
required to prevent rotation inside the Operation Unit. (Rubber seal included.) |
|
| Lock Ring |  |
--- | A22NZ-A-50501 | Used when a more secure lock is
required to prevent rotation of the Operation Unit. |
|
| Reinforcement Plate |  |
--- | A22NZ-A-C01 | Used to reinforce Contact Blocks
and Lighting Units, Refer to catalog for mounting instructions. |
|
| Key |  |
--- | A22NZ-K-01 | Used with a key-type selector switch. | |
| Control Box * |  |
1 hole | A22NZ-A-B01Y | ||
| Connector |  |
Suitable
Cable Diameter (mm) |
7 to 9 dia. | A22Z-3500-1 | Plastic connector used to extend
a cable from the switch box. Refer to catalog for details. |
| 9 to 11 dia. | A22Z-3500-2 | ||||
| Sealing Caps |  |
For flat models | A22Z-3600F | Used to prevent dust or water from
entering the Operation Unit. Color: opaque Material: silicon For exclusive use with panel cutouts of 22.3 and 25.5 mm dia. Knob-type and key-type selector switches cannot be used. |
|
| For projection models | A22Z-3600T | ||||
| For full-guard models | A22Z-3600G | ||||
| Resin Attachment for
30 dia. * |
 |
Round | A22Z-A30 | Use when mounting to a panel with
a 30-dia. hole. Refer to catalog for details. Purchase and mount a separate Lock Ring when using an indicator. |
|
| Small Legend Plate
Frame * |
 |
Black | A22NZ-A-50103 | Legend Plate with no text on black
background included. |
|
| Small Legend Plates
(Standard Size) * |
 |
Without text | A22Z-3443B | Black | |
| A22Z-3443R | Red | ||||
| A22Z-3443W | White | ||||
| A22Z-3443C | Transparent | ||||
| ○ | A22Z-3443R-2 | White text on red background | |||
| STOP | A22Z-3443R-4 | ||||
| | | A22Z-3443B-1 | White text on black background | |||
| START | A22Z-3443B-3 | ||||
| ON | A22Z-3443B-5 | ||||
| OFF | A22Z-3443B-6 | ||||
| UP | A22Z-3443B-7 | ||||
| DOWN | A22Z-3443B-8 | ||||
| POWER ON | A22Z-3443B-9 | ||||
| OFF-ON | A22Z-3443B-10 | ||||
| Large Legend Plate
Frame * |
 |
Black | A22NZ-A-51103 | Legend Plate with no text on black
background included. |
|
| Large Legend Plates * |  |
Without text | A22Z-3453B | Black | |
| A22Z-3453R | Red | ||||
| A22Z-3453W | White | ||||
| A22Z-3453C | Transparent | ||||
| Tightening Wrench |  |
--- | A22NZ-A-301 | Used to tighten Mounting Nuts from
the back of the panel. |
|
| LED Lamp Extractor |  |
--- | A22NZ-A-302 | Made of rubber and used to easily
remove and attach LED Lamps. |
|
| Cap Tightening
Wrench |
 |
--- | A22Z-3908 | Used to replace the Caps on Flat,
Projected, and Fullguard Pushbutton Switches. |
|
Top of Page