Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
NJ-series NJ Robotics CPU Units
![NJ501-4[][][]](../../../images/l_3387-13-226007-198x198.jpg)
about this Product Family
Related Contents
last update: October 03, 2016
Contact your OMRON representive for further details and conditions for robot systems.
| Product
Name |
Specifications | Num-
ber of con- trolled robots |
Data-
base Con- nection func- tion |
Current
consump- tion (A) |
Model | Stand-
ards |
||||
|---|---|---|---|---|---|---|---|---|---|---|
| I/O
capacity/ maximum number of configura- tion Units (Expansion Racks) |
Pro-
gram ca- pacity |
Memory
capacity for variables |
Number
of motion axes |
5
VDC |
24
VDC |
|||||
| NJ- series
CPU Units  |
2,560 points/
40 Units (3 Expansion Racks) |
20MB | 2 MB:
Retained during power interruption 4 MB: Not retained during power interruption |
64 | 8 max.
* |
No | 1.90 | ― | NJ501-4500 | UC1, N,
L, CE, RCM, KC |
| 32 | NJ501-4400 | |||||||||
| 16 | NJ501-4300 | |||||||||
| 16 | 1 | NJ501-4310 | ||||||||
| 16 | 8 max.
* |
Yes | NJ501-4320 | |||||||
* The number of controlled robots varies according to the number of axes used for the system.
Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.
The license number for a robot is required to use this CPU Unit. Please contact your OMRON sales representative for details.
| Product
name |
Specifications | Model | Stand-
ards |
||
|---|---|---|---|---|---|
| Number of
licenses |
Media | ||||
| Sysmac
Studio Standard Edition Ver.1.[][] |
The Sysmac Studio is the software that provides an
integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NY-series Industrial PC, EtherCat Slave, and the HMI. Sysmac Studio runs on the following OS. Windows 7 (32-bit/64-bit version)/Windows 8 (32- bit/64-bit version)/Windows 8.1 (32-bit/64-bit version)/Windows 10 (32-bit/64-bit version) The Sysmac Studio Standard Edition DVD includes Support Software to set up EtherNet/IP Units, DeviceNet slaves, Serial Communications Units, and Support Software for creating screens on HMIs (CX- Designer). For details, refer to the Sysmac Integrated Catalogue (P072). |
-
(Media only) |
DVD | SYSMAC-SE200D | ― |
| 1 license *1 | ― | SYSMAC-SE201L | ― | ||
| Sysmac
Studio Robot Additional Option *2 |
Sysmac Studio Robot Additional Option is a license
to enable the Vision & Robot integrated simulation. |
1 license | ― | SYSMAC-RA401L | ― |
Note: The license number for a robot is required to use this CPU Unit with the Sysmac Studio version 1.13 or lower.
Please contact your OMRON sales representative for details.
The Sysmac Studio version 1.14 or higher does not require the license number for a robot.
*1. Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
*2. Sysmac Studio Standard Edition is required to use this option.
For the Recommended EtherCAT and EtherNet/IP Communications Cables, refer to the Machine Automation Controller NJ/NX-Series Datasheet.
The following accessories come with the CPU Unit.
| Item | Specification |
|---|---|
| Battery | CJ1W-BAT01 |
| End Cover | CJ1W-TER01 (necessary to be connected to the right end of the CPU Rack.) |
| End Plate | PFP-M (2 pcs) |
last update: October 03, 2016
Item list of NJ501-4[][][]
Top of Page