Model | F3SR-430B *1 |
---|---|
Sensor type | Type 4 safety light curtain |
Applicable safety category | Category 4, 3, 2, 1, or B |
Detection capability | Opaque objects 30 mm in diameter |
Beam gap | 20 mm |
Number of beams | 8 to 112 |
Protective height | 190 to 2,270 mm |
Lens diameter | 7 mm x 12 mm |
Operating range *2 | For long distance wiring: 5 to 20 m
For short distance wiring: 0.3 to 7 m |
Response time | ON to OFF: 15 ms max., OFF to ON: 60 ms max. |
Startup waiting time | 2 s max. |
Power supply voltage (Vs) | 24 VDC±20 % (ripple p-p 10% max.) |
Current consumption (no load) | Refer to "List of Models/Current Consumption" below. |
Light source
(emitted wavelength) |
Infrared LED (870 nm) |
Effective aperture angle (EAA) | Based on IEC61496-2. Within ±2.5° for the emitter and receiver when the operating range is 3 m or over. |
Safety output (OSSD) | Two PNP transistor outputs, load current 500 mA max., residual voltage 2 V max. (except for voltage drop
due to cable extension), leak current 1 mA max. Allowable capacity load differs depending on the total cable length as shown below. *3 100 m max.: 0.05 µF max. 70 m max.: 0.5 µF max. 50 m max.: 1.0 µF max. |
Output operation mode | ON when receiving light |
Input voltage | Test input, reset input, external device monitoring input, and function selection input are all
ON voltage: 11 to 24 V OFF voltage: 0 to 5 V, or open Operating range selection input ON voltage: 11 to 24 V OFF voltage: 0 to 5 V |
Input current | Test input, reset input, function selection input: 1.5 to 3 mA
Operating range selection input: 1.5 to 4 mA External device monitoring input: 10 to 20 mA |
Indicators | Refer to "Indicators" on Data Sheet. |
Mutual interference
prevention function |
Interference prevention algorithm prevents mutual interference for up to three sets. |
Test functions | Self test (when power is turned ON and while power is supplied)
External test (emission stop function by test input) |
Safety functions | External device monitor
Start interlock, restart interlock |
Connection type | Connectors (M12, 8-pin) |
Protection circuits | Output short-circuit protection, and power supply reverse polarity protection |
Ambient temperature | Operating: -10 to 55°C (no icing), Storage: -25 to 70°C |
Ambient humidity | Operating: 35% to 85% (no condensation), Storage: 35% to 95% |
Ambient operating
light intensity |
Incandescent lamp: 3,000 lx max. (light intensity on the receiver surface), Sunlight: 10,000 lx max. (light
intensity on the receiver surface) |
Insulation resistance | 20 MΩ (at 500 VDC) |
Dielectric strength | 1,000 VAC 50/60 Hz, 1 min |
Degree of protection | IP65, IP67 (IEC60529) |
Vibration resistance | Malfunction: 10 to 55 Hz, 0.7-mm double amplitude, 20 sweeps in X, Y, and Z directions |
Shock resistance | Malfunction: 100 m/s2, 1,000 times each in X, Y, and Z directions |
Power supply cable | 6-mm-dia., allowable bending radius R5 mm |
Extension cable | 6.6-mm-dia., 8-pin (0.3 mm2 × 4P, resistance 0.058 Ω/m) with braided shield, allowable
bending radius R36 mm Total cable length: 100 m max. For details on twisted pairs, refer to "Single-end Connector Cable" on Data Sheet. Refer to "Double-end Connector Cable" on Data Sheet. |
Materials | Casing: Aluminum, zinc die-cast
Optical cover: PMMA resin (acrylic), cable: Oil resistant PVC |
Weight | Model: F3SR-430B[][][][] ([]: protective height)
Equation: Weight (g) = (protective height) x 4 + α The values for α are as follows: Protected height 190 mm : 1,100 Protected height 270 mm to 510 mm : 1,500 Protected height 590 mm to 1,070 mm : 2,000 Protected height 1,150 mm to 2,270 mm : 2,500 |
Accessories | User's Manual |
Applicable standards | EN61496-1 (Type 4 ESPE), CLC/TS61496-2 (Type 4 AOPD),
EN61508-1 to 3 (SIL3), EN62061 (SIL3), EN61000-6-4 ISO13849-1 (PLe/Safety Category 4), IEC61496-1 (Type 4 ESPE), IEC61496-2 (Type 4 AOPD), IEC61508-1 to 3 (SIL3), IEC62061 (SIL3), UL application in process (as of August 1, 2009) |