Building Automation

Industrial Automation

Power Automation & Safety

Bangladesh Distributor

F3SR-B

Safety Light Curtain

F3SR-B

For Safety Light Curtain Robust & Basic New Lineup. Understanding the Indicators at a Glance.

Item list of F3SR-B

about this Product Family

Inquiry of this Product

last update: August 20, 2014

Main Unit

Safety Light Curtain F3SR-430B (Type 4/PNP output)

Application	Detection capability	Beam gap	Appearance	Operating range (Infrared light)	Number of beams	Protective height (mm)	Model
Hand/arm protection	30-mm-dia.	20 mm		Long range * 5 to 20 m	8 to 112	190 to 2270	F3SR-430B[][][][]
Hand/arm protection	30-mm-dia.	20 mm		Short range * 0.3 to 7 m	8 to 112	190 to 2270	F3SR-430B[][][][]

Note: Connection cable is not included in the product. You must purchase optional connector cable.
* Range is selectable via easy wiring.

Safety Light Curtain Model List
F3SR-430B Series (Detection capability: 30 mm diameter/PNP output)

Model	Number of beams	Protective height (mm) *
F3SR-430B0190	8	190
F3SR-430B0270	12	270
F3SR-430B0350	16	350
F3SR-430B0430	20	430
F3SR-430B0510	24	510
F3SR-430B0590	28	590
F3SR-430B0670	32	670
F3SR-430B0750	36	750
F3SR-430B0830	40	830
F3SR-430B0910	44	910
F3SR-430B0990	48	990
F3SR-430B1150	56	1150
F3SR-430B1310	64	1310
F3SR-430B1470	72	1470
F3SR-430B1630	80	1630
F3SR-430B1790	88	1790
F3SR-430B1950	96	1950
F3SR-430B2110	104	2110
F3SR-430B2270	112	2270

* Protective height (mm) = Total sensor length

Accessories (sold separately)

Single-end Connector Cable (2 cables per set, for emitter and receiver)
For wiring with safety circuit such as single safety relay, safety relay unit, and safety controller

Appearance	Cable length	Specifications	Model
	3 m	M12 connector (8-pin) - 8-wire + Shield	F39-JD3A
	7 m		F39-JD7A
	10 m		F39-JD10A
	15 m		F39-JD15A
	20 m		F39-JD20A

Double-end Connector Cable (2 cables per set, for emitter and receiver)
Control unit for connection with F3SP-B1P and cable extension

Appearance	Cable length	Specifications	Model
	0.5 m	M12 connector (8-pin) - M12 connector (8-pin)	F39-JDR5B
	1 m		F39-JD1B
	3 m		F39-JD3B
	5 m		F39-JD5B
	7 m		F39-JD7B
	10 m		F39-JD10B
	15 m		F39-JD15B
	20 m		F39-JD20B

Relays with Forcibly Guided Contacts

Type	Appearance	Specifications	Model	Remarks
G7SA Relays with Forcibly Guided Contacts		Number of poles: 4 Contact type: 2NO+2NC Rated load: 250 VAC at 6 A, 30 VDC at 6 A	G7SA-2A2B	For details on other models and socket models.
G7SA Relays with Forcibly Guided Contacts		Number of poles: 4 Contact type: 3NO+1NC Rated load: 250 VAC at 6 A, 30 VDC at 6 A	G7SA-3A1B	For details on other models and socket models.
G7S-[]-E Relays with Forcibly Guided Contacts		Number of poles: 6 Contact type: 4NO+2NC Rated load: 250 VAC at 10 A, 30 VDC at 10 A	G7S-4A2B-E	For details on other models and socket models.
G7S-[]-E Relays with Forcibly Guided Contacts		Number of poles: 6 Contact type: 3NO+3NC Rated load: 250 VAC at 10 A, 30 VDC at 10 A	G7S-3A3B-E	For details on other models and socket models.

Control Unit

Appearance	Output	Model	Remarks
	Relay, 3NO+1NC	F3SP-B1P	For connection with F3SR-B, use an F39-JD[]B double-end connector cable.

Test rod

Diameter	Model
14mm dia.	F39-TRD14
20mm dia.	F39-TRD20
25mm dia.	F39-TRD25
30mm dia.	F39-TRD30

Laser Pointer

Appearance	Applicable sensor	Model	Remarks
	F3SR-430B series	F39-PTR	Laser pointer for long distance beam adjustment

Spatter Protection Cover (2 covers per set, for emitter and receiver) (Each unit reduces the operating range by 10%)

Appearance	Applicable sensor	Model
	F3SR-430B series	F39-HRB[][][][] *

* The same 4-digit numbers as the protective heights of F3SR-B ([][][][] in the light curtain type names) are substituted by [][][][] in the model names.
Note: When a spatter protection cover is mounted, the operating range of the F3SR-B is reduced by approximately 10%.

Top/Bottom Mounting Bracket (Not included with the product.)

Appearance	Specification	Model	Application	Remarks
	Top/bottom mounting bracket	F39-LR1	Top/bottom mounting bracket for F3SR-B. For side mounting and backside mounting.	2 for emitter, 2 for receiver (total of 4 per set)

Intermediate Mounting Bracket (Not included with the product. Purchase this bracket according to the sensor length.)

Appearance	Specification	Model	Application	Remarks
	Intermediate mounting bracket	F39-LR2	Use this bracket in combination with F3SR-B's top/bottom mounting bracket. For side mounting and backside mounting.	1 set with 2 pieces (For the number of brackets needed, see the table below.)

Free-Location Mounting Bracket (Not included with the product. Purchase this bracket according to the sensor length.)

Appearance	Specification	Model	Application	Remarks
	Free-location mounting bracket	F39-LR3	Use this bracket for mounting on any place without using top/bottom mounting bracket.	1 set with 2 pieces (For the number of brackets needed, see the table below.)

* Number of intermediate mounting brackets needed

Using top/bottom mounting bracket + intermediate mounting bracket (F39-LR2).

Protective height (mm)	No. of top/bottom mounting brackets	No. of intermediate mounting brackets
0190 to 0990	2	0
1070 to 1950	2	1
2030 to 2270	2	2

Using Free-location mounting bracket (F39-LR3).

Protective height (mm)	No. of free-location mounting brackets
0190 to 0750	2
0830 to 1470	3
1630 to 2110	4
2270	5

last update: August 20, 2014

Product Category

Safety Components
- Safety Sensors
  - F3SG-R
  - F3W-MA
  - F3SJ Series
  - F3SR-B
  - MS4800 Series
  - E3ZS, E3FS
  - F39-TC5
  - F3SP-T01
  - OS32C
  - UM, MC3
  - SGE / SCC

Top of Page

F3SR-B

For Safety Light Curtain Robust &amp; Basic New Lineup. Understanding the Indicators at a Glance.

Main Unit

Safety Light Curtain F3SR-430B (Type 4/PNP output)

Safety Light Curtain Model ListF3SR-430B Series (Detection capability: 30 mm diameter/PNP output)

Accessories (sold separately)

Single-end Connector Cable (2 cables per set, for emitter and receiver)For wiring with safety circuit such as single safety relay, safety relay unit, and safety controller

Double-end Connector Cable (2 cables per set, for emitter and receiver)Control unit for connection with F3SP-B1P and cable extension

Relays with Forcibly Guided Contacts

Control Unit

Test rod

Laser Pointer

Spatter Protection Cover (2 covers per set, for emitter and receiver) (Each unit reduces the operating range by 10%)

Top/Bottom Mounting Bracket (Not included with the product.)

Intermediate Mounting Bracket (Not included with the product. Purchase this bracket according to the sensor length.)

Free-Location Mounting Bracket (Not included with the product. Purchase this bracket according to the sensor length.)

* Number of intermediate mounting brackets needed

Using top/bottom mounting bracket + intermediate mounting bracket (F39-LR2).

Using Free-location mounting bracket (F39-LR3).

Product Category

For Safety Light Curtain Robust & Basic New Lineup. Understanding the Indicators at a Glance.

Safety Light Curtain Model List
F3SR-430B Series (Detection capability: 30 mm diameter/PNP output)

Single-end Connector Cable (2 cables per set, for emitter and receiver)
For wiring with safety circuit such as single safety relay, safety relay unit, and safety controller

Double-end Connector Cable (2 cables per set, for emitter and receiver)
Control unit for connection with F3SP-B1P and cable extension