The dimensions of the F3SJ-E and F3SJ-B are the same except for connector cables and cable leads.
Safety Light Curtain
about this Product Family
last update: December 18, 2015
The dimensions of the F3SJ-E and F3SJ-B are the same except for connector cables and cable leads.
Material: Stainless
Material : Zinc die-cast
Material : Zinc die-cast
Material : Zinc die-cast
Material : Zinc die-cast
Material : Stainless
Material : Stainless
C (protective height): 4-digit number in the Model name
A = C + 159
B = C + 86
C (protective height): 4-digit number in the Model name
A = C + 159
B = C + 86
Material: Stainless
C (protective height): 4-digit number in the Model name
A = C + 69
B = C + 47.5
D = C - 45
C (protective height): 4-digit number in the Model name
A = C + 69
B = C + 47.5
D = C - 45
Material: Stainless
Note: 1. The protective height of the F3SJ-E/B series that supports the contact mount bracket is limited.
Protective height allowed for mounting: 185 mm to 1,105 mm (225 mm to 545 mm for the model with the
suffix "-02TS")
2. Brackets of other models such as F39-LJB1 cannot be used simultaneously.
The number of the brackets needed for the F3SJ-B[][][][]P25-02TS differs from the other F3SJ-E/B series. The table below shows the number of brackets corresponding to the protective heights.
Cable color: Gray for emitter and Black for receiver
* Cables with L=3, 7, 10, 15, and 20 m are available.
Cable color: Gray for emitter and Black for receiver
L = [][][][] - 21 mm
Material: PC (protective cover)
Material: Stainless steel
Material: Brass
Material: Stainless steel
* Use F = 350 or less when none of the F values shown above are used.
When only F39-LJ3 free-location mounting brackets are used without standard brackets, allow a space of at least 350 mm between the brackets. The number of brackets required varies according to the protective height. For details about the number of required brackets, refer to the table below.
The standard included intermediate brackets are the same as the F39-LJ3 free-location mounting brackets. Purchase brackets as necessary if there are fewer intermediate brackets than required. When intermediate brackets are included, they can be used as free-location mounting brackets.
Note: Refer to the User's Manual for the dimensions for side mounting.
* Using M5 bolt, available range for mounting is 18 to 20
To check available brackets for replacement, refer to the table below.
To check dimensions when mounting brackets, refer to Catalog.
The values in the table correspond to in the model name, meaning the protective height (mm) of a sensor.
For backside mounting, the F3SJ-A and F3SJ-E/B can be used without modification due to compatibility in mounting hole pitch. For side mounting, a new hole needs to be made due to the different mounting hole pitch.
Dimensional drawing of mounting hole for side mounting using intermediate bracket
Single-end Connector Cable
F39-JD3A (L = 3 m)
F39-JD7A (L = 7 m)
F39-JD10A (L = 10 m)
F39-JD15A (L = 15 m)
F39-JD20A (L = 20 m)
Cable color: Gray for emitter Black for receiver
* Cables with L=3, 7, 10, 15, and 20 m are available.
Double-end Connector Cable
F39-JDR5B (L = 0.5 m)
F39-JD1B (L = 1 m)
F39-JD3B (L = 3 m)
F39-JD5B (L = 5 m)
F39-JD7B (L = 7 m)
F39-JD10B (L = 10 m)
F39-JD15B (L = 15 m)
F39-JD20B (L = 20 m)
Cable color: Gray for emitter Black for receiver
Material: Stainless steel
Material: PC (transparent area), ABS (non-transparent area)
* The four intermediate brackets (F39-PJ-MS) for side mounting are not provided.
*The Mounting Brackets (F39-EJ-R) are sold separately.
*The Mounting Brackets (F39-EJ-S) are sold separately.
last update: December 18, 2015