Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
How far should E4PA Ultrasonic Sensor be separated from each other?
Answer
Separate the Sensors as specified in the following table when using two or more Sensors in close proximity to one another.
Parallel Arrangement:
| Model | Y |
| E4PA-LS50-M1 | 0.3 m min. |
| E4PA-LS200-M1 | 1 m min. |
| E4PA-LS400-M1 | 2 m min. |
| E4PA-LS600-M1 | 2.5 m min. |
Note:The values shown in the table are for reference only. The actual values will vary depending on the surface conditions of the sensing object, and on the ultrasonic waves that are reflected. Moreover, if the sensing object is inclined, the Y value in the table will be increased further.
Facing Arrangement:
| Model | Y |
| E4PA-LS50-M1 | 2 m min. |
| E4PA-LS200-M1 | 8 m min. |
| E4PA-LS400-M1 | 16 m min. |
| E4PA-LS600-M1 | 25 m min. |
Recommended Products
Other Displacement Sensors / Measurement Sensors FAQ
-
Support Software "Smart Monitor" does not start properly. What is causing this, and what can be done to resolve it?
-
Does the temperature of the sensing object affect the detection ability of E4PA Ultra Sonic Displacement Sensor?
-
When a command was sent using Z300 High-precision Laser Profiling System serial communications output, an error was returned. Why is this?
FAQ
Top of page