Primary Contents

• What is the method that connects Rotary Encoder of phase difference output type (Phase A and Phase B output) to counter and adds at the reverse rotation?
• What is the main difference among the E6A2, E6B2, E6C2-C, E6C3-C and E6J-C Series of incremental Rotary Encoder?
• What is the feature of the Gray code?
• What timing is pulse signal of phase Z output?
• What is "Absolute code"?
• What is "Resolution"?
• What is "Output circuit"?
• What are the lead wire colors and signals for E6CP-AG5C-C/E69-DF5 Rotary Encoders?
• Can regular lead wire be added in the middle of E69-DF[] Extension Cables when it is connected to E6[][] Absolute Encoders and H8P[] Cam Positionesr?
• Is there a line receiver used for the encoder of the line driver output?
• How many meters of the cable of the Rotary Encoder are extended?
• What is the difference between single-turn absolute Rotary Encoder and multi-turn absolute Rotary Encoder?
• What happens if a coupling is not used?
• Can the origin (phase "Z") be positioned with only the Rotary Encoder (without seeing ON/OFF of the output)?
• What is the factor to miscount the output pulse of the incremental Rotary Encoder?
• What is "Maximum response frequency"?
• What are the precautions for mounting Rotary Encoders?
• What is the method of confirming abnormalities of the number of output pulse (omission of the number of pulse) in the incremental rotary encoder?
• What is "Electric response rotation"?
• How to mount the Rotary Encoder?
• What are peripherals that can be connected with the Rotary Encoder?
• What is the difference between incremental Rotary Encoder and absolute Rotary Encoder?
• What is the factor to misread the output data of the absolute Rotary Encoder?
• How is the UL standard of the sensor of the DC power system treated?
• How far should the shaft be inserted into the coupling?