Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Is there a table of instruction execution times for the NJ Series?
Answer
The user's manuals for the NJ-series Controller do not have a table of instruction execution times. This is because the program execution time cannot be calculated by simply adding the execution times for each instruction.
Please consult your OMRON representative about the execution times for individual instructions.
You can estimate the task execution time offline by using the simulation function of the Sysmac Studio. Run the simulation in Execution Time Estimation Mode to monitor the task execution times.
Recommended Products
Other Machine Automation Controllers FAQ
-
On an NJ-series Controller, I used a variable with a TIME data type to register the timer set value for a TON instruction and other timer instructions. I want to change the set value from an NS-series Programmable Terminal, but it does not support variables with a TIME data type. How should I set the timer?
-
Is there a limit to the number of user-defined function blocks and user-defined functions that I can create in an NJ-series Controller?
-
There are two ways to register as a user for the Sysmac Studio: by mailing the user registration post card or by using online registration. Should I use both?
FAQ
Top of page