Primary Contents

• When we install CX-Programmer FA Integrated Tool Package, what does Fins Gateway NSB Support Function means in the dialog?
• Can multiple Programmable Controllers (PLC) be connected to a single Programmable Terminal (PT)?
• A message saying the system is being initialized is being displayed. How can I restore operation?
• When multiple Programmable Terminals are connected to a Programmable Controller with 1:N NT Link communications and an error occurred in one of the Programmable Terminals, is it possible to detect that error from the Programmable Controller?
• What are the specifications of the NT-AL001 RS232C/RS-422A Link Adapter?
• What method is used to store the screens in the NT30, NT31, NT620, and NT631 Programmable Terminals?
• What is the baud rate of high-speed 1:N NT Link communications? Also, how can I switch communications from the standard NT Link protocol?
• Can Programmable Terminal (PT)'s screen data created with an MS DOS Version Support Tool for the Programmable Terminal "NT" (NT Support Tool) be modified with a Windows version NT Support Tool?
• In the NS-series Programmable Terminals, is there a way to create a group of buttons so that all of the other buttons go OFF when one of the buttons is ON (i.e., only 1 button can be ON at a time)?
• There are two serial ports on the NS-series Programmable Terminal, but can both ports communicate at the same time?
• Can the Programmable Terminal "NS" display a Ladder Logic of the Programmable Controller (PLC)?
• The NS-series Programmable Terminal is not equipped with an RS-422A port, so how can it communicate beyond the rated distance for RS-232C (15 m)?
• How can I import I/O comments that were created with the CX-Programmer FA Integrated Tool Package into the NT-ZJCMX1-EV4 NT Support Tool?
• Can a screen of the Programmable Terminal "NT" be created with the NS-Designer?
• What cables are used to connect the CX-Simulator to an OMRON Programmable Terminal to operate the Programmable Terminal?
• Can NS-series and NT-series Programmable Terminals be used together on one RS-232C port or one RS-422 port on a Programmable Controller?
• What Programmable Terminals can be used with the NT Support Tool?
• When connecting NS-series Programmable Terminals to Programmable Controllers with a RS-232C/RS-422 connection, the words "Connecting…" appear at the bottom right of a solid black screen and seem to stay there without changing. What causes this, and how do I fix it?
• Is the Support Tool for the Programmable Terminal "NT" (NT Support Tool) compatible with the Windows2000/XP? And, how about older versions of Windows?
• Which cable can I use to transfer the screen data or system program?
• How do I use the screen data transfer port on the NT31/631 Programmable Terminals?
• How can the NS-series Programmable Terminal's system program be reinstalled?
• What is the difference in the way that serial ports A and B are used on NT31/631 Programmable Terminals?
• What Programmable Terminals backup batteries are available?