Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Can other models of Reflectors be used with Retroreflective Photoelectric Sensors instead of the supplied Reflectors?
Answer
Yes, these Reflectors can be used: E39-R1, E39-R1S, E39-R2, E39-R3, E39-R9, E39-R10, E39-RS1, E39-RS2, and E39-RS3.
This does not apply, however, to Photoelectric Sensors for detecting transparent objects (E3Z-B, E3S-R, E3S-CR62/67, E32-R21, and E32-R16) or to the E3T.
Explanation:
The following table gives the sensing distances for the Reflectors listed above.
Example: E3Z
| Reflector | Sensing distance |
| E39-R1 | 3 m |
| E39-R1S | 4 m |
| E39-R2 | 5 m |
| E39-R3 | 1.5 m |
| E39-R9 | 2.5 m |
| E39-R10 | 3.5 m |
| E39-RS1 | 700 mm |
| E39-RS2 | 1.1 m |
| E39-RS3 | 1.4 m |
Note:Tape Reflectors (E39-RS1, E39-RS2, and E39-RS3) can be used cut to the desired size.
Recommended Products
Other Photoelectric Sensors FAQ
-
Can a Photoelectric Sensor with an Optical Fiber be used in an explosion-proof area?
-
What's the difference between a Reflective Fiber Unit and a Coaxial Reflective Fiber Unit?
-
Our Photoelectric Sensors malfunction when the power supply of an inverter motor or other equipment is switched ON or OFF.
What's causing this, and what can we do to resolve it?
FAQ
Top of page