Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
How do I interpret the catalog values for mutual interference with Proximity Sensors?
Answer
Refer to the following figures.
Mutual Interference
Use Sensors with the values in the following table or higher when they are mounted facing each other or in parallel.
| Model | Item | M8 | M12 | M18 | M30 | |
| DC 2-Wire Models E2E-X[]D[] AC/DC 2-Wire Models E2E-X[]T1 | Shielded | A | 20 | 30 (20) | 50 (30) | 100 (50) |
| B | 15 | 20 (12) | 35 (18) | 70 (35) | ||
| Unshielded | A | 80 | 120 (60) | 200 (100) | 300 (100) | |
| B | 60 | 100 (50) | 110 (60) | 200 (100) | ||
Note:Values in parentheses apply to Sensors operating at different frequencies.
The values listed above are given in the precautions section of the catalog. Dimensions A and B are specified by the way in which the Proximity Sensors are arranged. If a gap cannot be provided between the Proximity Sensors, they can be used close together up to the catalog values in parentheses by using a standard model in combination with a model that has a different frequency.
Note:Two of the Sensors with a different frequency cannot be used near each other. Leave a gap of at least the value not in parentheses.
Recommended Products
Other Proximity Sensors FAQ
-
What kind of consideration points does it have when the relay is connected to Proximity Sensors?
-
What is the allowable bending radius of coaxial cables or shielded cables for Photoelectric Sensors and Proximity Sensors?
-
How many 2-wire DC Proximity Sensors can be connected to the input side of B7AP Power Couplers?
FAQ
Top of page