Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
How does the Floatless Level Controllers "61F"operate when the power returns after power failure?
Answer
If the power fails while the self-holding circuit is set to ON, the self-holding circuit is turned OFF and kept in the OFF state even after the power recovers. Therefore, when using the Floatless Level Controller "61F-GN", in the automatic operation of water supply, the pump is ON until the level of water reaches the Electrode "E1".
Meanwhile, in the automatic operation of water drainage, the pump is not turned ON until the level of water reaches the E1.
Recommended Products
Other Level Switches FAQ
-
Why do the specifications for the High-sensitivity 61F Floatless Level Controller say, "possible to use with 15 kOHM or less, however, this may cause reset failure"?
-
Can two 61F Floatless Level Controllers and two Electrode Holders be used in the same tank?
-
When voltage is applied to 61F Floatless Level Controller, it operates regardless of the actual liquid level. What is the cause of the problem and how can it be corrected?
FAQ
Top of page