Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Can two 61F Floatless Level Controllers and two Electrode Holders be used in the same tank?
Answer
Yes, they can as long as the following conditions are met.
The interelectrode voltages are the same.
The minimum separation between the Electrode Holders depends on the type of liquid, but separate the Electrode Holders by at least 1 m.
Use the same phases at the power supply terminals (S0, S1, and S2).
Recommended Products
Other Level Switches FAQ
-
Why do the specifications for the High-sensitivity 61F Floatless Level Controller say, "possible to use with 15 kOHM or less, however, this may cause reset failure"?
-
When voltage is applied to 61F Floatless Level Controller, it operates regardless of the actual liquid level. What is the cause of the problem and how can it be corrected?
-
With 61F-G1 Floatless Level Controller, the water level of a water supply is above the E2' height, but the pump does not operate. What is the cause of the problem and how can it be corrected?
FAQ
Top of page