Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Can I program flickering back-and-forth between two outputs when a switch is ON?
Answer
The following are the time chart and ladder programming for the operation specifications.
Time Chart
Figure 1
CIO 000000: Pushbutton switch (CIO 0.00)
CIO 000200: Alternating output A (CIO 2.00)
CIO 000201: Alternating output B (CIO 2.01)
After turning ON the pushbutton switch (CIO 0.00), the two outputs (CIO 2.00 and CIO 2.01) will alternate turning ON at intervals of T1 seconds, and remain ON for T2 seconds.
Ladder Program
Flicker Programming
Programming: CS1/CJ1-series Programmable Controllers
Figure 2
Output Switching Program
Programming: CS1/CJ1-series
Figure 3
Recommended Products
Other Programmable Controllers FAQ
-
What products are recommended as substitutes for the C200H-CPU01 Programmable Controller?
-
How can I connect a C200H Programmable Controller's CPU Unit with an IBM PC/AT or compatible computer?
-
Why communication error occurs during CX-Programmer FA Integrated Tool Package get online with Programmable Controller?
FAQ
Top of page