Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

P2RF, P2R, P7TF, PYF, PY, PTF, PYD, PT, P7LF, P7S, P7SA, PF, P2CF, PFA, P3G / P3GA, PL

Products Related to Common Sockets and DIN Tracks

P2RF, P2R, P7TF, PYF, PY, PTF, PYD, PT, P7LF, P7S, P7SA, PF, P2CF, PFA, P3G / P3GA, PL

A Wide Variety of Square and Round Sockets in Front-mounting and Back-mounting Models

about this Product Family

Square Sockets

Model P2RF (front-mounting) P2R (back-mounting) P7TF
(front-
mounting)
Number
of pins
Solder
terminals
PCB terminals
5 pins P2RF-05
Approx. 27 g
P2RF-05-E *
Approx. 38 g
P2RF-05-S
Approx. 36 g
P2R-05A
Approx. 5 g
P2R-05P
Approx. 5 g
P2R-057P
Approx. 5.5 g
P7TF-05
Approx. 28 g
811_lu_1_1 811_lu_1_2 811_lu_1_3 811_lu_1_7 811_lu_1_8 811_lu_1_9 811_lu_1_13
8 pins P2RF-08
Approx. 33 g
P2RF-08-E *
Approx. 38 g
P2RF-08-S
Approx. 40 g
P2R-08A
Approx. 5 g
P2R-08P
Approx. 5 g
P2R-087P
Approx. 5.5 g
―――
811_lu_1_4 811_lu_1_5 811_lu_1_6 811_lu_1_10 811_lu_1_11 811_lu_1_12

Note: 1. The structure of []-E models provides finger protection. Round terminals cannot be used. Use forked crimp
                terminals.
           2. To remove the Relay, pull the lever on the Socket with your fingers supporting the lever and the opposite side of
                the Relay case, and jiggle the Relay.
* Use a #1 Phillips screwdriver to tighten the screws on this Socket.

Minimum Order Lot

The following models are available at the minimum order lot specified below.

Model P2RF P2R P7TF Minimum order lot (pcs)
Number of pins
5 pins P2RF-05 P2R-05A P2R-05P P7TF-05 10
8 pins P2RF-08 P2R-08A P2R-08P ――

Model PYF (front-mounting) PY (back-mounting)
Number
of pins
Solder terminals Wrapping terminals PCB terminals
8 pins PYF08A
Approx. 32 g
PYF08M
Approx. 26 g
PY08
Approx. 8 g
PY08-Y1
PY08-Y3
PY08QN
Approx. 12 g
PY08QN2
PY08QN-Y1
PY08QN2-Y1
PY08-02 *2
Approx. 7.2 g
811_lu_3_1 811_lu_3_3 811_lu_3_10 811_lu_3_11 811_lu_3_16 811_lu_3_17 811_lu_3_22
PYF08A-E *1 PYF08S
Approx. 46 g
――― ――― ―――
811_lu_3_2 811_lu_3_4
11 pins PYF11A
Approx. 43 g
――― PY11
Approx. 9 g
PY11-Y1 PY11QN
PY11QN2
PY11QN-Y1
PY11QN2-Y1
PY11-02 *2
811_lu_3_5 811_lu_3_12 811_lu_3_13 811_lu_3_18 811_lu_3_19 811_lu_3_23
14 pins PYF14A
Approx. 49 g
PYF14T
Approx. 53 g
PY14
Approx. 10 g
PY14-Y1
PY14-Y3
PY14QN
Approx. 14 g
PY14QN2
PY14QN-Y1
PY14QN2-Y1
PY14QN-Y3
PY14QN2-Y3
PY14-02 *2
811_lu_3_6 811_lu_3_8 811_lu_3_14 811_lu_3_15 811_lu_3_20 811_lu_3_21 811_lu_3_24
PYF14A-E *1 PYF14S
Approx. 62 g
――― ――― ―――
811_lu_3_7 811_lu_3_9

Note: 1. The structure of []-E models provides finger protection. Round terminals cannot be used. Use forked crimp
                terminals.
           2. Refer to Models with Standards Certification for detailed information on the models of Common Sockets that are
                certified for standards.
*1. Use a #1 Phillips screwdriver to tighten the screws on this Socket.
*2. The structure does not resist flux. Manual soldering is recommended for this product.

Model PTF (front-mounting) PT (back-mounting)
Number
of pins
Solder terminals Wrapping terminals PCB terminals
8 pins PTF08A
Approx. 47 g
PTF08A-E *1 PT08
Approx. 11 g
PT08QN
Approx. 10.4 g
PT08-0 *2
Approx. 8 g
811_lu_4_1 811_lu_4_2 811_lu_4_6 811_lu_4_9 811_lu_4_12
11 pins PTF11A
Approx. 61 g
――― PT11
Approx. 13 g
PT11QN PT11-0 *2
Approx. 12.2 g
811_lu_4_3 811_lu_4_7 811_lu_4_10 811_lu_4_13
14 pins PTF14A
Approx. 77 g
PTF14A-E *1 PT14
Approx. 17 g
PT14QN
Approx. 20 g
PT14-0 *2
Approx. 16.2 g
811_lu_4_4 811_lu_4_5 811_lu_4_8 811_lu_4_11 811_lu_4_14

Note: The structure of []-E models provides finger protection. Round terminals cannot be used. Use forked crimp
            terminals.
* Use a #1 Phillips screwdriver to tighten the screws on this Socket.
* The structure does not resist flux. Manual soldering is recommended for this product.

Minimum Order Lot

The following models are available at the minimum order lot specified below.

Model PYF PY PTF PT Minimum order lot (pcs)
Number of pins
8 pins PYF08A
PYF08M
PY08 PTF08A PT08 10
11 pins PYF11A PY11 PTF11A PT11
14 pins PYF14A PY14 PTF14A PT14

Model P7LF (front-mounting)
Number of pins
6 pins P7LF-06
Approx. 60 g
811_lu_6_1

Model P7S/P7SA
Number of pins Front-mounting PCB terminals
10 pins P7SA-10F
Approx. 44 g
811_lu_7_1 P7SA-10P
Approx. 9 g
811_lu_7_4
P7SA-10F-ND
Approx. 44 g
14 pins P7S-14F-END
Approx. 110 g
811_lu_7_2 P7S-14P-E
Approx. 25 g
811_lu_7_5
P7SA-14F
Approx. 59 g
811_lu_7_3 P7SA-14P
Approx. 10 g
811_lu_7_6
P7SA-14F-ND
Approx. 59 g

Round Sockets

Model PF
(front-
mounting)
P2CF
(front-
mounting)
PFA
(front-
mounting)
P3G
(back-
mounting)
PL (back-mounting)
Number
of pins
Solder
terminals
Wrapping
terminals
PCB
terminals
8 pins PF083A
Approx. 34 g
P2CF-08
Approx. 55 g
8PFA
Approx. 57 g
P3G-08
Approx. 40 g
PL08
Approx. 14 g
PL08-Q
Approx. 15 g
PLE08-0
Approx. 10.6 g
811_lu_8_1 811_lu_8_6 811_lu_8_10 811_lu_8_14
Note: The
Y92A-48G
Terminal
Cover can
be used to
provide
finger
protection.
811_lu_8_16 811_lu_8_20 811_lu_8_22
PF083A-E * P2CF-08-E 8PFA1
Approx. 66 g
―― ―― ――
811_lu_8_2 811_lu_8_7 811_lu_8_11
PF085A
Approx. 40 g
―― ――
811_lu_8_3
11 pins PF113A
Approx. 47 g
P2CF-11
Approx. 70 g
11PFA
Approx. 74 g
P3GA-11
Approx. 47 g
PL11
Approx. 15 g
PL11-Q
Approx. 18.5 A
PLE11-0
Approx. 10.8 g
811_lu_8_4 811_lu_8_8 811_lu_8_12 811_lu_8_15
Note: The
Y92A-48G
Terminal
Cover can
be used to
provide
finger
protection.
811_lu_8_17 811_lu_8_21 811_lu_8_23
PF113A-E * P2CF-11-E ―― ―― ―― ――
811_lu_8_5 811_lu_8_9
14 pins ―― ―― 14PFA
Approx. 104 g
―― PL15
Approx. 28 g
―― ――
811_lu_8_13 811_lu_8_18
20 pins ―― ―― ―― ―― PL20
Approx. 17 g
―― ――
811_lu_8_19

Note: The structure of []-E models provides finger protection. Round terminals cannot be used. Use forked crimp
            terminals.
* Use a #1 Phillips screwdriver to tighten the screws on this Socket.

Minimum Order Lot

The following models are available at the minimum order lot specified below.

Model PF P2CF PFA P3G PL
Number of pins
8 pins PF083A, PF085A P2CF-08, P2CF-08-E 8PFA. 8PFA1 P3G-08 PL08
11 pins PF113A P2CF-11, P2CF-11-E 11PFA P3GA-11 PL11
14 pins --- --- 14PFA --- PL15
Minimum order lot (pcs) 20 10 20 10

Terminal Cover

Model Y92A-48G
Appearance 811_lu_10_1

Hold-down Clips

(Unit: mm)

For Square Sockets

PHC-12 PKC
One Set (2 CliPs)
PTC-1 PYC-A1
Approx. 0.54 g
One Set (2 Clips)
PYC-A2
One Set (2 Clips)
PYC-E1
One Set (2 Clips)
811_lu_11_1 811_lu_11_2 811_lu_11_3 811_lu_11_4 811_lu_11_5 811_lu_11_6
PYC-P
Approx. 1.4 g
PYC-P2
Approx. 1.2 g
PYC-S
Approx. 1.8 g
PYC-1
Approx. 6 g
PYC-2 PYC-3
811_lu_11_7 811_lu_11_8 811_lu_11_9 811_lu_11_10 811_lu_11_11 811_lu_11_12
PYC-5 PYC
Approx. 0.2 g
Y92H-1 Y92H-3
One Set (2 Clips)
Y92H-4 ―――
811_lu_11_13 811_lu_11_14 811_lu_11_15 811_lu_11_16 811_lu_11_17

For Round Sockets

PFC-A1
Approx. 2.2 g
One Set (2 Clips)
PFC-A6
Approx. 2.4 g
One Set (2 Clips)
PFC-A7
Approx. 3.0 g
One Set (2 Clips)
PLC
Approx. 2.4 g
One Set (2 Clips)
PLC-1
Approx. 2.6 g
One Set (2 Clips)
811_lu_12_1 811_lu_12_2 811_lu_12_3 811_lu_12_4 811_lu_12_5
PLC-7
Approx. 3.0 g
One Set (2 Clips)
PLC-8
Approx. 6.4 g
One Set (2 Clips)
PLC-10
Approx. 2.0 g
One Set (2 Clips)
PLC-12
Approx. 5.4 g
One Set (2 Clips)
―――
811_lu_12_6 811_lu_12_7 811_lu_12_8 811_lu_12_9

Minimum Order Lot

The following models are available at the minimum order lot specified below.

Type Model Minimum order lot (pcs)
For Square Sockets PYC-A1
PYC-P
100
PYC-A2
PYC-S
PYC-1
PYC-2
PYC-3
PYC-5
10
For Round Sockets PFC-A1
PFC-A6
PFC-A7
PLC
20

Relay Sockets and Socket Bridges for PYF

Bridges within the Same Socket

Pitch Applicable
models
Appearance Model Specifications
7 mm PYF14A 811_lu_14_1 PYD-020B[](2P) Max. carry current: 20 A (18 A at 70°C)
Ambient operating temperature: -40 to 70°C (with no icing
or condensation)
Ambient operating humidity: 45% to 85% (with no icing or
condensation)
Conductor material: Brass
Conductor surface treatment: Nickel plating
Package qty: 50/bag
811_lu_14_2 PYD-030B[](3P)

Note: 1. The [] in the model number is replaced with the insulation color specification code. B: Black, Y: Yellow
           2. Specify the number of bags when ordering.

Bridges between Adjacent Sockets

Pitch Applicable
models
Appearance Model Specifications
22 mm PYF08A 811_lu_15_1 PYD-025B[](2P) Max. carry current: 20 A (18 A at 70°C)
Ambient operating temperature: -40 to 70°C (with no
icing or condensation)
Ambient operating humidity: 45% to 85% (with no icing or
condensation)
Conductor material: Brass
Conductor surface treatment: Nickel plating
Package qty: 10/bag
811_lu_15_2 PYD-085B[](8P)
29 mm PYF14A 811_lu_15_3 PYD-026B[](2P) Max. carry current: 20 A (18 A at 70°C)
Ambient operating temperature: -40 to 70°C (with no
icing or condensation)
Ambient operating humidity: 45% to 85% (with no icing or
condensation)
Conductor material: Brass
Conductor surface treatment: Nickel plating
Package qty: 10/bag
811_lu_15_4 PYD-086B[](8P)

Note: 1. The [] in the model number is replaced with the insulation color specification code. B: Black, S: Blue, R: Red
           2. Specify the number of bags when ordering.

Socket Bridges

Pitch Applicable models Appearance and dimensions (mm) Model Insulation color
19.7 mm PYF08S 811_lu_16_1 PYDM-08SR Red
PYDM-08SB Blue
27.5 mm PYF14S PYDM-14SR Red
PYDM-14SB Blue
14.3 mm P2RF-[][]-S P2RM-SR Red
P2RM-SB Blue

Note: 1. Use the Socket Bridges for relay coil bridge wiring.
           2. Specify the number of bags when ordering.

Release Lever

Applicable models Appearance Model
PYF08S 811_lu_17_1 PYCM-08S
PYF14S 811_lu_17_2 PYCM-14S
P2RF-05-S 811_lu_17_3 P2CM-S
P2RF-08-S

Accessories for DIN Track Mounting (Order Separately)

DIN Tracks

Model
PFP-100N
PFP-50N
PFP-100N2

End Plate

Model
PFP-M

Spacer

Model
PFP-S