Sensing method | Retro-reflective (with MSR function) | Distance-setting | |||||||
---|---|---|---|---|---|---|---|---|---|
Model | E3G-R13 | E3G-R17 | E3G-MR19 | E3G-MR19T | E3G-L73 | E3G-L77 | E3G-ML79 | E3G-ML79T | |
Sensing distance | 10 m (500 mm) *1 (when using E39-R2) | White paper (300 x 300 mm): 0.2 to 2 m | |||||||
Setting distance | --- | White paper (300 x 300 mm): 0.5 to 2 m | |||||||
Standard sensing object |
Opaque: 80-mm dia. min. | --- | |||||||
Differential travel | --- | 10% of setting distance | |||||||
Directional angle | Sensor: 1° to 5° | --- | |||||||
Reflectivity characteristics (black/ white error) |
--- | ±10% max. (at 1-m sensing distance) | |||||||
Light source (wavelength) |
Red LED (650 nm) | Infrared LED (860 nm) | |||||||
Spot size | --- | 70 dia. max. (at 1-m sensing distance) | |||||||
Power supply voltage |
10 to 30 VDC, ripple (p-p): 10% |
12 to 240 VDC±10%, ripple (p-p): 10% max. 24 to 240 VAC±10% at 50/60 Hz |
10 to 30 VDC, ripple (p-p): 10% (p-p) |
12 to 240 VDC±10%, ripple (p-p): 10% max. 24 to 240 VAC±10% at 50/60 Hz |
|||||
Current/Power consumption |
50 mA max. | 2 W max. | 60 mA max. | 2 W max. | |||||
Control output | Load power supply voltage: 30 VDC max. Load current: 100 mA max. Residual voltage: NPN output: 1.2 V max. PNP output: 2.0 V max. Open collector output (NPN/PNP selectable) L.ON/D.ON selectable |
Relay output: SPDT, 3 A (cosΦ = 1) max. at 250 VAC or 3 A max. at 30 VDC L.ON/D.ON selectable |
Load power supply voltage: 30 VDC max. Load current: 100 mA max. Residual voltage: NPN output: 1.2 V max. PNP output: 2.0 V max. Open collector output (NPN/PNP selectable) L.ON/D.ON selectable |
Relay output: SPDT, 3 A (cosΦ = 1) max. at 250 VAC or 3 A max. at 30 VDC L.ON/D.ON selectable |
|||||
Life expect- ancy (relay output) |
Me- chani- cal |
--- | 50,000,000 operations min. (switching frequency: 18,000 operations/h) |
--- | 50,000,000 operations min. (switching frequency: 18,000 operations/h) |
||||
Electri- cal |
--- | 100,000 operations min. (switching frequency: 1,800 operations/h) |
--- | 100,000 operations min. (switching frequency: 1,800 operations/h) |
|||||
Protection circuits |
Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention |
Mutual interference prevention |
Power supply reverse polarity protection, Output short-circuit protection, Mutual interference prevention |
Mutual interference prevention |
|||||
Response time | Operate or reset: 1 ms | Operate or reset: 30 ms max. | Operate or reset: 5 ms | Operate or reset: 30 ms max. | |||||
Sensitivity adjustment |
One-turn adjuster | Teaching (in NORMAL or ZONE mode) | |||||||
Timer function | --- | ON- or OFF- delay : 0 to 5 s (adjustable) |
--- | ON- or OFF- delay : 0 to 5 s (adjustable) |
|||||
Ambient illumination (Receiver side) |
Incandescent lamp: 3,000 lx max. Sunlight: 10,000 lx max. |
||||||||
Ambient temperature range |
Operating: -25° to 55°C, Storage: -30° to 70°C (with no icing or condensation) | ||||||||
Ambient humidity range |
Operating: 35% to 85%, Storage: 35% to 95% (with no condensation) | ||||||||
Insulation resistance |
20 MΩ min. at 500 VDC | ||||||||
Dielectric strength |
1,000 VAC, 50/60 Hz for 1 min |
2,000 VAC, 50/60 Hz for 1 min. |
1,000 VAC, 50/60 Hz for 1 min |
2,000 VAC, 50/60 Hz for 1 min. |
|||||
Vibration resistance |
Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||||||
Shock resistance | Destruction: 500 m/s2 3 times each in X, Y, and Z directions | ||||||||
Degree of protection |
IEC 60529 IP67 (with protective cover) | ||||||||
Connection method |
Pre-wired (Standard length: 2 m) |
Connector (M12) |
Terminal block | Pre-wired (Standard length: 2 m) |
Connector (M12) |
Terminal block | |||
Weight (packed state) |
Approx. 150 g |
Approx. 50 g |
Approx. 150 g | Approx. 50 g |
Approx. 150 g | ||||
Mate- rial |
Case | PBT (polybutylene terephthalate) | |||||||
Lens | Mechacrylic resin | ||||||||
Accessories *2 | Reflector, Adjustment screwdriver, and Instruction manual |
Adjustment screwdriver and Instruction manual |