Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
NX-series IO-Link Master Unit
about this Product Family
Related Contents
last update: October 11, 2016
• The standards are abbreviated as follows: U: UL, U1: UL(Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, CE: EU Directives, RCM: Regulatory Compliance Mark, and KC: KC Registration.
• Contact your OMRON representative for further details and applicable conditions for these standards.
| Product name | Specification | Model | Standards | ||
|---|---|---|---|---|---|
| Number of
IO-Link ports |
I/O refreshing
method |
I/O connection
terminals |
|||
| NX-series IO-Link Master Unit | 4 | Free-Run refreshing | Screwless clamping
terminal block |
NX-ILM400 | UC1, CE,
RCM, KC |
Order a cable with a connector on one end to connect a sensor. Refer to the Ordering Information in the catalog of the sensor to connect or the Sensor I/O Connectors/Sensor Controllers on your local OMRON website for recommended products.
| Product name | Specification | Model | Standards |
|---|---|---|---|
| Unit/Terminal Block Coding Pins | Pins for 10 Units
(30 terminal block pins and 30 Unit pins) |
NX-AUX02 | --- |
| Product name | Specification | Model | Standards | |||
|---|---|---|---|---|---|---|
| No. of
terminals |
Terminal number
indications |
Ground terminal
mark |
Terminal current
capacity |
|||
| Terminal Block | 16 | A/B | Not provided | 10 A | NX-TBA162 | --- |
Please purchase a DVD and required number of licenses the first time you purchase the Sysmac Studio. DVDs and licenses are available individually. Each model of licenses does not include any DVD.
| Product
name |
Specification | Model | Stand-
ards |
||
|---|---|---|---|---|---|
| Number of
licenses |
Media | ||||
| Sysmac
Studio Standard Edition Ver.1.[][] |
The Sysmac Studio is the software that provides an
integrated environment for setting, programming, debugging and maintenance of machine automation controllers including the NJ/NX-series CPU Units, NY-series Industrial PC, EtherCAT Slave, and the HMI. Sysmac Studio runs on the following OS. Windows 7 (32-bit/64-bit version)/Windows 8 (32-bit/ 64-bit version)/Windows 8.1 (32-bit/64-bit version)/ Windows 10 (32-bit/64-bit version) The Sysmac Studio Standard Edition DVD includes CX- Configurator FDT to set up IO-Link Master Units and IO-Link devices. For details, refer to the Sysmac Integrated Catalogue (P072). |
---
(Media only) |
DVD | SYSMAC-SE200D | --- |
| 1 license * | --- | SYSMAC-SE201L | |||
* Multi licenses are available for the Sysmac Studio (3, 10, 30, or 50 licenses).
last update: October 11, 2016
Item list of NX-ILM400
Top of Page