ZX0

CMOS Laser Sensor with Built-in Amplifier

ZX0

Stable Detection of Level Differences in the Order of 0.1 mm

Item list of ZX0

about this Product Family

Inquiry of this Product

Features
Lineup
Specifications
Dimensions
Catalog

last update: September 14, 2015

Ratings and Specifications

Model	NPN output	ZX0-LD50A61 ZX0-LD50A66	ZX0-LD100A61 ZX0-LD100A66	ZX0-LD300A61 ZX0-LD300A66	ZX0-LD600A61 ZX0-LD600A66
Model	PNP output	ZX0-LD50A81 ZX0-LD50A86	ZX0-LD100A81 ZX0-LD100A86	ZX0-LD300A81 ZX0-LD300A86	ZX0-LD600A81 ZX0-LD600A86
Sensing distance		50 ± 10 mm	100 ± 35 mm	300 ± 150 mm	600 ± 400 mm
Standard detectable level difference *1	Ambient temperature of 10 to 40°C	0.2 mm	0.7 mm	3.0 mm	15 mm
Standard detectable level difference *1	Ambient temperature of -10 to 55°C	0.5 mm	1.0 mm	6.0 mm	25 mm
Light source (wavelength)		Visible-light semiconductor laser (wavelength: 660 nm, 1 mW max., IEC/EN Class 2, FDA Class 2 *2)
Spot diameter (reference value) (Defined at the measurement center distance) *3		0.17 mm dia.	0.33 mm dia.	0.52 mm dia.	0.56 mm dia.
Power supply voltage		10 to 30 VDC (including 10% ripple (p-p))
Power consumption		2,500 mW max. (105 mA max. at 24 VDC, 210 mA max. at 12 VDC)
Control output		Load power supply voltage: 30 VDC max., Load current: 100 mA max. (Residual voltage: 1 V max. (load current 10 mA or less), 2 V max. (load current of 10 to 100 mA))
Monitor output		Current output: 4 to 20 mA, maximum load resistance: 300 Ω (The output is 20 mA for the nearest point in the measurement range in respect to the Sensor and 4 mA for the farthest point.)
Functions		Smart tuning, keep function, background removal, OFF-delay timer, ON-delay timer, one-shot timer, ON/OFF-delay timer, zero reset, area output, eco function, hysteresis width setting, and setting initialization
Indicators		Digital display (red), output indicator (OUT1, OUT2) (orange), zero reset indicator (orange), menu indicator (orange), laser ON indicator (green), and smart tuning indicator (blue)
Response time	Judgment output	Super-high-speed (SHS) Mode: 1.5 ms, Very-high-speed (VHS) Mode: 3 ms, High-speed (HS) Mode: 10 ms, or Standard (STND) Mode: 50 ms
	Laser OFF input	200 ms max.
	Zero reset input	200 ms max.
Ambient illumination		Illumination on received light surface: 7,500 lx or less (incandescent light)		Illumination on received light surface: 5,000 lx or less (incandescent light)
Ambient temperature		Operating: -10 to 55°C, Storage: -15 to 70°C (with no icing or condensation)
Ambient humidity		Operating and storage: 35% to 85% (with no condensation)
Dielectric strength		1,000 VAC, 50/60 Hz, 1 minute
Vibration resistance (destruction)		10 to 55 Hz, 1.5-mm double amplitude, 2 hours each in X, Y, and Z directions
Shock resistance (destruction)		500 m/s² 3 times each in X, Y, and Z directions
*Degree of protection 4**		IEC IP67
*Connection method 5**		Pre-wired model (Standard cable length: 2 m) Pre-wired connector model (Standard cable length: 0.5 m)
Weight (packed state/ sensor only)	Pre-wired models (2 m)	Approx. 240 g/Approx. 180 g		Approx. 270 g/Approx. 210 g
	Pre-wired models (5 m)	Approx. 450 g/Approx. 330 g		Approx. 480 g/Approx. 360 g
	Pre-wired connector models (0.5 m)	Approx. 170 g/Approx. 110 g		Approx. 200 g/Approx. 140 g
Materials		Case and cover: Polybutylene terephthalate, Optical window: Glass, Cable: PVC
Accessories		Instruction sheet, Laser warning label (English), and FDA certification label

Note: Refer to the table given below for the ratings and specifications of Sensors with Class 1 lasers.
*1. The values were measured at the center of the sensing distance using OMRON’s standard sensing object (white
       ceramic).
*2. Classified as Class 2 by IEC60825-1 criteria in accordance with the FDA standard provisions of Laser Notice No. 50.
       CDRH registration has been completed. (Center for Devices and Radiological Health) (Accession Number: 1210040)
*3. Spot diameter: Defined as 1/e2 (13.5%) of the central intensity at the measurement center distance.
       False detections can occur in the case there is light leakage outside the defined region and the surroundings of the
       target object have a high reflectance in comparison to the target object.
       Accurate measurements may not be possible for workpieces that are smaller than the spot diameter.
*4. IP67 protection applies to the connector on pre-wired connector models if an extension cable is connected.
*5. Use a Pre-wired Connector Model together with an Extension Cable (10 m or 20 m).

Ratings and Specifications of Sensors with Class 1 lasers (ZX0-LD[]L)

The ratings and specifications that are different from those of the Sensors with Class 2 lasers are given below.

Model	ZX0-LD50A61L/ZX0-LD50A81L ZX0-LD100A61L/ZX0-LD100A81	ZX0-LD300A61L/ZX0-LD300A81L ZX0-LD600A61L/ZX0-LD600A81L
FDA Class	Class1 0.24 mW max.
IEC/EN Class	Class1 0.24 mW max.
Ambient illumination	Illumination on received light surface 5,000 lx or less (incandescent light)	Illumination on received light surface 2,500 lx or less (incandescent light)
Connection method	Pre-wired model (2 m)
Accessories	Instruction sheet and Explanatory label (English), FDA certification label

Accession Number: 1210040

last update: September 14, 2015

Top of Page

ZX0

Stable Detection of Level Differences in the Order of 0.1 mm

Ratings and Specifications

Ratings and Specifications of Sensors with Class 1 lasers (ZX0-LD[]L)

Product Category