Item list of E5CN-HT
Note: The terminal block cannot be removed.
Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
E5CN-HT
Programmable Temperature Controller (Digital Controller) (48 x 48 mm)
Programmable Controllers Join the Series! Program up to 256 segments and take advantage of the high cost performance of the new LCD that improves both the field of view and contrast.
about this Product Family
Related Contents
- Temperature Controllers
- Features
- Lineup
- Specifications
- Dimensions
- Catalog
last update: April 01, 2015
Caution: All units are in millimeters unless otherwise indicated.
E5CN-HT
Accessories (Order Separately)
USB-Serial Conversion Cable
E58-CIFQ1
Terminal Cover
E53-COV17
Note: The E53-COV10 can not be used.
Waterproof Packing
Y92S-P8 (for DIN 48 × 48)
Order the Waterproof Packing separately if it becomes lost or damaged.
The Waterproof Packing can be used to achieve an IP66 degree of protection.
(Deterioration, shrinking, or hardening of the waterproof packing may occur depending on the operating environment. Therefore, periodic replacement is recommended to ensure the level of waterproofing specified in IP66. The time for periodic replacement depends on the operating environment. Be sure to confirm this point at your site. Consider one year a rough standard. OMRON shall not be liable for the level of water resistance if the customer does not perform periodic replacement.)
The Waterproof Packing does not need to be attached if a waterproof structure is not required.
Current Transformers
E54-CT1
E54-CT3
E54-CT3 Accessory
E54-CT1
Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)
Maximum continuous heater current: 50 A (50/60 Hz)
Number of windings: 400±2
Winding resistance: 18±2 Ω
E54-CT3
Thru-current (Io) vs. Output Voltage (Eo) (Reference Values)
Maximum continuous heater current: 120 A (50/60 Hz)
(Maximum continuous heater current for an OMRON Temperature Controller is 50 A.)
Number of windings: 400±2
Winding resistance: 8±0.8 Ω
Adapter
Y92F-45
Note: 1. Use this Adapter when the panel has already been prepared for the E5B[].
2. The Adapter is available only in black.
2. The Adapter is available only in black.
Mounted to E5CN-HT
DIN Track Mounting Adapter
Y92F-52
Note: This Adapter cannot be used together with the Terminal Cover.
Remove the Terminal Cover to use the Adapter.
Remove the Terminal Cover to use the Adapter.
Mounted to E5CN-HT
last update: April 01, 2015
Top of Page