Safety outputs | Auxiliary outputs | Rated voltage | Terminal block type | Model |
---|---|---|---|---|
SPDT-NO | SPDT-NC | 24 VDC | Screw terminals | MC3 |
Safety Mat/Safety Mat Controller
about this Product Family
last update: September 24, 2012
Safety outputs | Auxiliary outputs | Rated voltage | Terminal block type | Model |
---|---|---|---|---|
SPDT-NO | SPDT-NC | 24 VDC | Screw terminals | MC3 |
Dimensions | Black | Yellow | |
---|---|---|---|
A (mm) | B (mm) | Model | Model |
300 | 300 | UMM5-0300-0300 | UMYM5-0300-0300 |
400 | 400 | UMM5-0400-0400 | UMYM5-0400-0400 |
500 | 250 | UMM5-0500-0250 | UMYM5-0500-0250 |
500 | 400 | UMM5-0500-0400 | UMYM5-0500-0400 |
500 | 500 | UMM5-0500-0500 | UMYM5-0500-0500 |
500 | 1500 | UMM5-0500-1500 | UMYM5-0500-1500 |
600 | 400 | UMM5-0600-0400 | UMYM5-0600-0400 |
750 | 250 | UMM5-0750-0250 | UMYM5-0750-0250 |
750 | 500 | UMM5-0750-0500 | UMYM5-0750-0500 |
750 | 750 | UMM5-0750-0750 | UMYM5-0750-0750 |
750 | 1500 | UMM5-0750-1500 | UMYM5-0750-1500 |
1000 | 500 | UMM5-1000-0500 | UMYM5-1000-0500 |
1000 | 750 | UMM5-1000-0750 | UMYM5-1000-0750 |
1000 | 1000 | UMM5-1000-1000 | UMYM5-1000-1000 |
1000 | 1250 | UMM5-1000-1250 | UMYM5-1000-1250 |
1000 | 1500 | UMM5-1000-1500 | UMYM5-1000-1500 |
Appearance | Name | Model | Remarks |
---|---|---|---|
Ramp Trim with Yellow
PVC Cover (1.22 m) |
UMRT4 | Installed on the perimeter of the Safety Mat. Each Trim
is composed of two parts, an aluminum base and a PVC Cover. Possible to install cables inside. |
|
Ramp Trim with Yellow
PVC Cover (2.44 m) |
UMRT8 | ||
Joining Trim (1.22 m) | UMJS4 | The Joining Trims join the Safety Mats when two or
more Safety Mats are being combined. In addition to joining the Safety Mats, the Joining Trims preserve the Safety Mat's sensitivity at the joints. |
|
Joining Trim (2.44 m) | UMJS8 | ||
Aluminum Ramp Trim
(2.44 m) |
UMAL | Installed on the perimeter of the Safety Mat. | |
Molded Outside Corner | UMOC | Installed at the outside corners of the Safety Mat
combining with Ramp Trims with Yellow PVC Cover. |
|
Molded Inside Corner | UMIC | Installed at the inside corners when two or more
Safety Mats combining with Ramp Trims with Yellow PVC Cover are being combined. |
Note: Screws (No. 8 ✕ 32 mm) and anchors (12 each) are included with each Trim.
Appearance | Name | Model | Remarks |
---|---|---|---|
Distribution Box
(for six mats) |
UMDB-6 | Used to connect to two or more Safety Mats to the
single MC3 Safety Mat Controller. |
|
Waterproof Cover | XS2Z-22 | Used to protect the unused connectors of UMDB-6. | |
Y Connector | UM-Y-2-1 | Used to connect two Safety Mats to the single MC3
Safety Mat Controller. |
|
Panel-mount Connector | UMPMC | Distributes to individual lines to connect the Safety
Mat to a MC3 Safety Mat Controller. |
|
Extension Cable (3 m) | UMEC-03 | This cable is used to extend a cable, or to connect
the UMPMC to the UMDB-6. |
|
Extension Cable (5 m) | UMEC-05 | ||
Extension Cable (10 m) | UMEC-10 | ||
Extension Cable (15 m) | UMEC-15 | ||
Connector with cable
Socket on one cable end (1 m) |
XS2F-D421-C80-F | Used to connect the UMDB-6 to the MC3 Safety
Mat Controllers. |
|
Connector with cable
Socket on one cable end (2 m) |
XS2F-D421-D80-F | ||
Connector with cable
Socket on one cable end (5 m) |
XS2F-D421-G80-F | ||
Connector with cable
Socket on one cable end (10 m) |
XS2F-D421-J80-F |
Note: For trims and accessories required for the Safety Mat system configuration, see "Installation" on Catalog.
last update: September 24, 2012