Item list of MK-S(X)
Models for DC Loads
Standard Models
MKS1XT-10, MKS2XT-11
Models with Built-in Operation Indicators
MKS1XTN-10, MKS2XTN-11
Models for AC Loads
Standard Models
MKS1T-10, MKS2T-11
Models with Built-in Operation Indicators
MKS1TN-10, MKS2TN-11
Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
MK-S(X)
Power Relays
MK-S-series Relays with DC-switching Models That Can Switch 220 VDC, 10 A (Resistive Load).
about this Product Family
Related Contents
- General Purpose Relays
- Features
- Lineup
- Specifications
- Dimensions
- Catalog
last update: November 06, 2012
Caution: All units are in millimeters unless otherwise indicated.
General-purpose Relays
Standard Models
MKS1XT-10, MKS2XT-11
Models with Built-in Operation Indicators
MKS1XTN-10, MKS2XTN-11
Models for AC Loads
Standard Models
MKS1T-10, MKS2T-11
Models with Built-in Operation Indicators
MKS1TN-10, MKS2TN-11
Models for DC Loads
Models with Test Button
MKS1XTI-10, MKS2XTI-11
Models with Test Button and Built-in Operation Indicators
MKS1XTIN-10, MKS2XTIN-11
Models for AC Loads
Models with Test Button
MKS1TI-10, MKS2TI-11
Models with Test Button and Built-in Operation Indicators
MKS1TIN-10, MKS2TIN-11
Connecting Socket
Back-connecting Socket
P7M-06P
Front-connecting Socket
P7MF-06
P7MF-06-D
Note: 1. The internal connections diagram is for the MKS2(X)T[][]-11.
2. The P7MF-06-D has polarity. Be careful to wire with the correct polarity.
2. The P7MF-06-D has polarity. Be careful to wire with the correct polarity.
Accessory (Order Separately)
Connecting Socket
Note: 1. The P7M-06P, P7MF-06, and P7MF-06-D can be used with models for DC loads with an SPST-NO or SPST-NO/
SPST-NC contact form or with models for AC loads with an SPST-NO or SPST-NO/SPST-NC contact form.
2. The P7MF-06-D has a built-in diode and can thus be used only with Relays with DC operating coils. Do not use
it with a Relay with an AC operating coil.
3. Refer to Gang Mounting on Catalog for the conditions required for gang mounting.
SPST-NC contact form or with models for AC loads with an SPST-NO or SPST-NO/SPST-NC contact form.
2. The P7MF-06-D has a built-in diode and can thus be used only with Relays with DC operating coils. Do not use
it with a Relay with an AC operating coil.
3. Refer to Gang Mounting on Catalog for the conditions required for gang mounting.
Relay Hold-down Clips
Use the Clips to securely mount the Relay and prevent it from falling due to vibration or shock.
PYC-A2
One Set (Two Clips)
Note: The minimum order for the PYC-A2 is ten clips.
Socket Mounting Height
P7M-06P
P7MF-06
P7MF-06-D
last update: November 06, 2012
Top of Page