Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

E3ZM-V

Color Mark Detection Compact Photoelectric Sensor

E3ZM-V

Color Mark Detection in a World-standard Size (11 × 21 × 32 mm), with High-speed Response (50 μs) and Accuracy in Spite of Sensing Object Movement

about this Product Family

Sensor

Sensing method Appearance Connection method Sensing distance Model
NPN output PNP output
Mark Sensor
(Diffuse reflective)
Pre-wired (2 m) 12±2 mm *
(White light)
E3ZM-V61 2M E3ZM-V81 2M
Connector (M8, 4 pins) E3ZM-V66 E3ZM-V86

* A deviation of ±2 mm (typical value) can be handled for combinations of white, yellow, and black. Refer to Data Sheet
  for the detection capability for other color combinations.

Accessories

Sensor I/O Connectors (Sockets on One Cable End)

(Models for Connectors: A Connector is not provided with the Sensor. Be sure to order a Connector separately.)

Size Cable Appearance Cable type Model
M8 (4 pins) Standard Straight *1
2 m 4-wire XS3F-E421-402-A
5 m XS3F-E421-405-A
L-shaped *1 *2
2 m XS3F-E422-402-A
5 m XS3F-E422-405-A

Note: The outer cover of the cable is made of PVC (polyvinyl chloride), the nut is SUS316L, and the degree of protection
          is IP67. When high-pressure washing will be used, select an I/O Connector that has IP69K degree of protection.
*1. The connector will not rotate after connecting.
*2. The cable is fixed at an angle of 180° from the sensor emitter/receiver surface.

Mounting Brackets

A Mounting Bracket is not provided with the Sensor. Order a Mounting Bracket separately if required.

Appearance Model
(Material)
Quantity Remarks Appearance Model
(Metal
material)
Quantity Remarks
E39-L153
(SUS304) *1
1 Mounting Brackets
E39-L98
(SUS304) *2
1 Protective Cover Bracket
E39-L104
(SUS304) *1
1
E39-L150
(SUS304)
1 (Sensor adjuster)
Easily mounted to the aluminum
frame rails of conveyors and
easily adjusted.
For vertical angle adjustment
E39-L43
(SUS304) *2
1 Horizontal Mounting
Brackets
E39-L151
(SUS304)
1
E39-L142
(SUS304) *2
1 Horizontal Protective
Cover Bracket
E39-L44
(SUS304)
1 Rear Mounting Bracket
E39-L144
(SUS304) *2
1 Compact Protective Cover
Bracket

Note: When using Through-beam models, order one bracket for the Receiver and one for the Emitter.
*1. Cannot be used for Standard Connector models with mounting surface on the bottom. In that case, use Pre-wired
       Connector models.
*2. Cannot be used for Standard Connector models.