Item list of MS4800 Series
| Series | Advanced Series | Basic Series | |||
|---|---|---|---|---|---|
| Model | Individual
use |
MS4800A-30-[] | MS4800A-40-[] | MS4800B-30-[] | MS4800B-40-[] |
| Series
connection |
MSF4800A-30-[] | MSF4800A-40-[] | MSF4800B-30-[] | MSF4800B-40-[] | |
| Sensor type | Type 4 Safety Light Curtain | ||||
| Setting tool connection | Connectable | ||||
| Applicable safety category | Category 4, 3, 2, 1, or B | ||||
| Minimum detectable object | Opaque object:
30-mm dia. |
Opaque object:
40-mm dia. |
Opaque object:
30-mm dia. |
Opaque object:
40-mm dia. |
|
| Beam gap (P) | 20 mm | 30 mm | 20 mm | 30 mm | |
| Number of beams (n) | 14 to 106 | 12 to 68 | 14 to 106 | 12 to 68 | |
| Protective height (PH) | 280 to 2120 mm | 360 to 2040 mm | 280 to 2120 mm | 360 to 2040 mm | |
| Sensing distance *1 | 0.3 to 20 m (selectable from 0.3 to 8 m with the Programming and Diagnostics
Module) |
||||
| Lens diameter | Diameter 7 mm | ||||
| Response time
(under stable light incident condition) (Refer to Response Time below for details.) |
ON to OFF | Individual:
14 to 32 ms |
Individual:
14 to 23 ms |
Individual:
14 to 32 ms |
Individual:
14 to 23 ms |
| OFF to ON | 320 ms max. | ||||
| Startup waiting time | 3.5 s max. for individual use, 4.5 s max. for series connection | ||||
| Power supply voltage (Vs) | 24 VDC ±20% (ripple p-p: 5% max.) | ||||
| Current
consumption *2 (no load) |
Transmitter | 285 mA max. | |||
| Receiver | 450 mA max. | ||||
| Light source (emitted
wavelength) |
Infrared LEDs (wavelength: 880 nm) | ||||
| Effective aperture angle (EAA) | Within ±2.5° for the Transmitter and Receiver at a sensing distance of at least 3 m
according to IEC 61496-2. |
||||
| Control output (OSSD) *3 | Output transistor: PNP × 2, Load current: 625 mA max. (at 24 VDC), short-circuit
protection |
||||
| Auxiliary output *3
(non-safety output) |
Output transistor:
PNP × 1 or NPN × 1, selectable with the Programming and Diagnostics Module, Load current: 100 mA max. (at 24 VDC) Output mode: Control output synchronizing or alarm is selectable with the Programming and Diagnostics Module |
Output transistor:
PNP × 1, Load current: 100 mA max. (at 24 VDC) Output mode: Control output synchronizing |
|||
| Output operation mode | Control output 1, 2: Light-ON
Auxiliary output: Control Output Synchronizing Mode: Auxiliary output goes ON when control output goes ON Alarm Mode: Auxiliary output goes ON when the MS4800 enters alarm (lockout) condition |
||||
| Input voltage | External device monitoring input ON voltage: 11 to 28.8 V, OFF voltage: 0 to 2.6 V
Start input ON voltage: 11 to 28.8 V, OFF voltage: 0 to 1.2 V For the MS4800B, use NC contacts for the start input switch. For the MS4800A, refer to Start Input Methods (MS/MSF4800A Only) on Data Sheet. |
||||
| Internal
indicators |
Transmitter | Transmitter Indicator (Yellow): Indicator is ON when transmitting | |||
| Receiver | Blanking Indicator (Orange): Indicator is ON in Blanking Active State
Interlock or Alarm (Lockout) Indicator: Indicator is ON in Interlock State, and indicator flashes in Alarm (Lockout) State Machine Run/Stop Indicator (Green/Red): Green indicator is ON when Control Output is ON, and red indicator is ON when Control Output is OFF |
||||
| Mutual interference
prevention function |
The scan code (A/B) can be switched with the Programming and Diagnostics Module | ||||
| Series connection | MSF4800 only
• Connectable segments: 4 max. • Total number of beams: 256 max. • Maximum cable length between segments: 10 m • Response time when connected: Refer to Data Sheet. |
||||
| Test functions | • Self test (when power is turned ON and while power is supplied)
• External test (light emission stop function by test input) |
||||
| Safety functions | • Selection of auto start mode and
interlock mode • External device monitoring • Muting (MSF4800A only) (MS4800-RM6 (sold separately) is required.) • Fixed blanking • Floating blanking • Monitored blanking • Reduced resolution blanking |
• Selection of auto start mode and
interlock mode • External device monitoring |
|||
| Connection method | Power supply connectors (M12, Transmitter: 5-pin, Receiver: 8-pin)
Series-connection connectors: (M12, Transmitter: 4-pin, Receiver: 4-pin) |
||||
| Protective circuit | Output short-circuit protection, reverse polarity protection | ||||
| Ambient temperature | Operating: -10 to 55°C (with no icing), storage: -25 to 70°C | ||||
| Ambient humidity | 95% max. (with no condensation) | ||||
| Insulation resistance | 20 MΩ min. (at 500 VDC) | ||||
| Dielectric strength | Transmitter: 350 VAC 60 Hz 1 min
Receiver: 500 VDC 1 min |
||||
| Degree of protection | IP65 (IEC 60529) | ||||
| Vibration resistance | Malfunction: 10 to 55 Hz, 0.7-mm double amplitude, 20 sweeps in X, Y, and Z
directions |
||||
| Shock resistance | Malfunction: 10G, 1,000 times in X, Y, and Z directions | ||||
| Materials | Case: Aluminum with polyurethane powder coating
Cap: Polycarbonate |
||||
| Weight (packed state) | • MS4800[]-30-[][][][]: Weight (g) = α x Protective height + 349
• MSF4800[]-30-[][][][]: Weight (g) = α x Protective height + 361 • MSF4800[]-30-[][][][]-XR2: Weight (g) = α x Protective height • MS4800[]-40-[][][][]: Weight (g) = α x Protective height + 370 • MSF4800[]-40-[][][][]: Weight (g) = α x Protective height + 382 • MSF4800[]-40-[][][][]-XR2: Weight (g) = α x Protective height The values for α are as follows: For protective height from 240 to 280: 10 For protective height from 320 to 360: 9 For protective height from 400 to 1,080: 8 For protective height from 1,120 to 1,840: 7 For protective height from 1,880 to 2,120: 6 |
||||
| Accessories | Test rod, Instruction Manual, mounting set (2 top, 2 bottom mounting brackets),
surge absorber |
||||
| Applicable standards | IEC 61496-1, EN 61496-1, UL 61496-1 Type 4 ESPE (Electro-Sensitive Protective
Equipment), IEC 61496-2, CLC/TS61496-2, UL 61496-2 Type 4 AOPD (Active Opto-electronic Protective Devices), IEC 61508 SIL3 |
||||
Top of Page