Four screen sizes are available, from 5.7 to 12.1 inches.
Programmable Controllers
about this Product Family
last update: November 06, 2012
Four screen sizes are available, from 5.7 to 12.1 inches.
This allows PLC data to be read or written without adding an Ethernet Unit. PLC data can also be read or written, and alarms and recipes can be transferred, from a host computer.
• Screen data and ladder programs can be easily transferred via Ethernet.
• PLC data can also be read by a host application (using FINS communications).
• PLC2 data can be easily displayed and set from the NSJ (PLC1) display.
Note: It is also easy to allocate data from another host device for reference.
The PLC data link function can be used to provide a high-speed, large-capacity data link between Controllers.
Used to mount Motion Control Units and other Special I/O Units or CPU Bus Units to the NSJ-series Controller, for excellent expandability.
The NSJ built-in Ethernet port increases expandability with host computers by enabling functions such as communications implemented with CMND instructions and e-mail.
Note: For detailed information on functions related to the NSJ built-in Ethernet port and Ethernet Unit, refer to Catalog.
Waste and inconsistency in design, installation and maintenance can be eliminated by supplying control panels that have the same basic operation regardless of the factory, the process, and the devices used in any country of the world.
Use of a commercially available USB cable allows easy, high-speed transferring of screen data and ladder programs. There is also no need to change cables for transfers such as these.
Continue to use all the screen data for NS-series PTs and ladder programs for CS/CJ-series PLCs.
The test functions of the CX-Designer Screen Designer for NS Series have been further strengthened. By selecting CX-Simulator as the connection destination, screen data and ladder programs can be simultaneously tested without even having to connect to an actual system.
More than 2,000 Smart Active Parts (SAP) are available for directly accessing OMRON PLCs and components. Simply copy them from the library and paste them onto the screen. There is absolutely no need to design screens or ladder programs for these objects.
The standard-equipped PLC Troubleshooter and DeviceNet Troubleshooter contribute to solving problems during device startup and operation. When an error occurs, simply follow the on-screen instructions to confirm the error details and quickly implement countermeasures, without referring to the manual.
This software lets you monitor PLC program status, search for addresses or instructions, monitor multiple I/O points, and much more. It only takes about 5 seconds to switch from a user screen to the ladder program monitoring screen. From a selected input bit, you can also search for the next sequence output instruction that uses the same address.
Simply follow the on-screen instructions to back up both screen data and ladder programs for the Controller Section.
last update: November 06, 2012