Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

XW5T-P

DIN Track Push-in Terminal Blocks

XW5T-P

Our Value Design Products Increase the Value of Your Control Panels. Push-in Plus Terminal Blocks to Downsize Control Panels and Save Work.

about this Product Family

Model Number Legend

XW5T-P Lineup 1

Ordering Information

Classification Product
Type
Nominal
Cross
Section
(mm2)
Number
of levels
Number of
cramp
position
per level
Color Weight
(gram)
Model
Feed
Through
Terminal
Blocks
Standard
terminals
1.0 1 2 Dark gray 3.3 XW5T-P1.5-1.1-1
2.5 1 2 6.3 XW5T-P2.5-1.1-1
4 1 2 8.4 XW5T-P4.0-1.1-1
1.0 1 2 Blue 3.3 XW5T-P1.5-1.1-1BL
2.5 1 2 6.3 XW5T-P2.5-1.1-1BL
4 1 2 8.4 XW5T-P4.0-1.1-1BL
Multi tiers
terminal
1.0 2 2 Dark gray 6.5 XW5T-P1.5-1.1-2
1.0 2 2 Blue 6.5 XW5T-P1.5-1.1-2BL
Multi
conductor
terminals
1.0 1 3 Dark gray 4.1 XW5T-P1.5-1.2-1
1.0 1 3 Blue 4.1 XW5T-P1.5-1.2-1BL
1.0 1 4 Dark gray 4.9 XW5T-P1.5-2.2-1
1.0 1 4 Blue 4.9 XW5T-P1.5-2.2-1BL
Grounding
Terminal
Blocks
Standard
terminals
1.0 1 2 Green/
yellow
4.7 XW5G-P1.5-1.1-1
2.5 1 2 9.9 XW5G-P2.5-1.1-1
Multi tiers
terminal
4 1 2 11.8 XW5G-P4.0-1.1-1
1.0 2 2 8.1 XW5G-P1.5-1.1-2
Multi
conductor
terminals
1.0 1 3 5.5 XW5G-P1.5-1.2-1
1.0 1 4 6.3 XW5G-P1.5-2.2-1

Accessories

Short Bars

For XW5T-P1.5-[] or XW5G-P1.5-[]

Appearance No. of poles Colors Model Application
3480_lu_2_1 2 Red (RD)
Blue(BL)
Yellow (YL)
XW5S-P1.5-2[][] Used for cross-over wiring between
Terminal Blocks.
3 XW5S-P1.5-3[][]
4 XW5S-P1.5-4[][]
5 XW5S-P1.5-5[][]
10 XW5S-P1.5-10[][]

For XW5T-P2.5-[] or XW5G-P2.5-[]

Appearance No. of poles Colors Model Application
3480_lu_3_1 2 Red (RD)
Blue(BL)
Yellow (YL)
XW5S-P2.5-2[][] Used for cross-over wiring between
Terminal Blocks.
3 XW5S-P2.5-3[][]
4 XW5S-P2.5-4[][]
5 XW5S-P2.5-5[][]
10 XW5S-P2.5-10[][]

For XW5T-P4.0-[] or XW5G-P4.0-[]

Appearance No. of poles Colors Model Application
3480_lu_4_1 2 Red (RD)
Blue(BL)
Yellow (YL)
XW5S-P4.0-2[][] Used for cross-over wiring between
Terminal Blocks.
3 XW5S-P4.0-3[][]
4 XW5S-P4.0-4[][]
5 XW5S-P4.0-5[][]
10 XW5S-P4.0-10[][]

Labels

Appearance Applicable
Terminal
Blocks
Model Minimum order in
sheets
(quantity per sheet)
Application
3480_lu_5_1 XW5[]-P1.5-[] XW5Z-P1.5LB1 5 sheets with 102 top
labels per sheet
Used to identify wiring.
(Material: PA resin, blank)
Different models are used for the
top and side surfaces.
XW5Z-P1.5LB2 5 sheets with 108 side
labels per sheet
XW5[]-P2.5-[] XW5Z-P2.5LB1 5 sheets with 72 top
labels per sheet
XW5Z-P2.5LB2 5 sheets with 72 side
labels per sheet
XW5[]-P4.0-[] XW5Z-P4.0LB1 5 sheets with 60 top
labels per sheet
XW5Z-P4.0LB2 5 sheets with 60 side
labels per sheet

Note:
1. There is no place to mount the Top-surface Labels on Terminal Blocks with Two Tiers, so they cannot be used.
2. If you use commercially available nameplates (9.5 mm width and 0.5 mm thickness), you can use a commercially available printer. Check with the manufacturer of the nameplates for information on applicable printers.
3. Refer to catalog for details on printing labels.

End Cover

Appearance Applicable
Terminal Blocks
Model Application
3480_lu_6_1 XW5[]-P1.5-1.1-1 XW5E-P1.5-1.1-1 This part is required to prevent electric shock.
If Terminal Blocks with different shapes are
installed side by side, mount an End Cover on the
exposed metal surface.
XW5[]-P1.5-1.1-2 XW5E-P1.5-1.1-2
XW5[]-P1.5-1.2-1 XW5E-P1.5-1.2-1
XW5[]-P1.5-2.2-1 XW5E-P1.5-2.2-1
XW5[]-P2.5-1.1-1 XW5E-P2.5-1.1-1
XW5[]-P4.0-1.1-1 XW5E-P4.0-1.1-1

End Brackets

Appearance Width (mm) Model Application
3480_lu_7_1 6 XW5Z-EP6 End Brackets are installed on the ends of the Terminal Blocks to
prevent them from moving on the DIN Track.

Separator Plates

Appearance Width (mm) Model Application
3480_lu_8_1 12 XW5Z-EP12 This part is used to create insulation distance.
Use Separator Plates according to the clearance and creeping
distances required by the operating conditions of your
equipment.

Note: Refer to 6. Using the Accessories on catalog for information on using the accessories.