Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.

Note 2: NJ-series and NX-series PLC are certified for the bridge.

　　　 For type approvals, these models shall not be installed on the deck or on machinery that has severe vibration conditions.

Note 3: When using as an NK product, attach a noise filter on the power supply line.

　　　 Use the TAH-06-683 from Cosel Co., Ltd., for the noise filter.

Type approval of the NK (Nippon Kaiji Kyokai) was made according to Chapter 1, Part 7 of Guidance for the Approval and Type Approval of Materials and Equipment for Marine Use.

Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.

Note 2: CJ1, CJ2, CS and W4S1 series are certified for the bridge.

When using CJ1, CJ2 or CS series PLC on the bridge, attach a noise filter on the power supply line.

Use the TAH-06-683 manufactured by Cosel Co., Ltd., for the noise filter.

Note 3: The power for W4S1 series should be supplied from S8VS series manufactured by Omron or equivalent.

Note 4: For type approvals, these models shall not be installed on the deck, in the bridge(except for CJ1, CJ2, CS and W4S1 series), or on machinery that has severe vibration conditions.

Type approval of the NK (Nippon Kaiji Kyokai） was made according to Chapter 1, Part 7 of Guidance for the Approval and Type Approval of Materials and Equipment for Marine Use.

Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.

Note 2: For type approvals, these models shall not be installed on the deck, in the bridge, or on machinery that has severe vibration conditions.

Type approval of the NK (Nippon Kaiji Kyokai） was made according to Chapter 1, Part 7 of Guidance for the Approval and Type Approval of Materials and Equipment for Marine Use.

Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.

Note 2: NS-series PTs are certified for the bridge.

　　　When using an NS-series PT on the bridge, attach a noise filter and an electromagnetic shield.

　　　Use the TAH-06-683 from Cosel Co., Ltd., for the noise filter.

　　　Use the E09F-100 or E09R13502P from Seiwa Electric Mfg. Co., Ltd., for the electromagnetic shield.

　　　Refer to the product manuals for details.

Note 3: For type approvals, these models shall not be installed on the deck, in the bridge, or on machinery that has severe vibration conditions.

　　　NS and NA5-series PTs can be installed on the bridge.

Note 4: For use in the bridge, additional power supply filter Schaffner FN-2080-xx is to be connected to the NA5-series power terminals.

Type approval of the NK (Nippon Kaiji Kyokai) was made according to Chapter 1, Part 7 of Guidance for the Approval and Type Approval of Materials and Equipment for Marine Use.