Automation Systems - GL Certification (German Marine Standards) - Europe, Germany | Omron Bangladesh by Kyoto engineering & Automation

Building Automation

Industrial Automation

Power Automation & Safety

Bangladesh Distributor

Global Navigation

GL Certification (German Marine Standards) for Automation Systems

Model	Ratings	Environmental Category	Requirement class
CJ1/CJ2	---	C : EMC2	Class 3
CQM1	---	C : EMC2	Class 3

Note 1: The above table lists series names. Ask your OMRON representative for details on specific model numbers.

Note 2: For type approvals, these models shall not be installed on the deck, in the bridge, or on machinery that has severe vibration conditions.

Type approval of the GL (Germanischser Lloyd) was made according to the Regulations for the Performance of Type Test, Part 2, Edition 2003.

Refer to the following tables for environmental categories and requirement classes.

Environmental Category	Environmental Conditions
	Closed Area			Open Deck Area
	Temperature	Relative Humidity	Vibrations	Temperature	Relative Humidity	Vibrations
A	0 °C to + 45 °C	to 100 %	0,7 g (Curve 1)	---	---	---
B	0 °C to + 45 °C	to 100 %	4 g (Curve 2)	---	---	---
C	0 °C to + 55 °C	to 100 %	0,7 g (Curve 1)	---	---	---
D	0 °C to + 55 °C	to 100 %	4 g (Curve 2)	---	---	---
E	0 °C to + 40 °C	to 80 %	0,7 g (Curve 1)	---	---	---
F	---	---	---	- 25 °C to + 45 °C	to 100 %	0,7 g (Curve 1)
G	---	---	---	- 25 °C to + 45 °C	to 100 %	2,3 g

Requirement class	Extent of damage
Requirement class	Effects on persons	Effects on the environment	Technical damage
1	none	none	insignificant
2	slight injury	insignificant	minor
3	serious, irreversible injury	significant	serious
4	loss of human life	critical	considerable
5	much loss of human life	catastrophic	loss