Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
What is coil surge?
Answer
It is a characteristic of the coil in which a large reverse voltage is momentarily generated when Relays are turned OFF. To deal with this problem, some Relays are equipped with surge-absorbing circuits.
When contacts are used for input, surge-absorbing circuits can be used to extend the service life of Relays, prevent the effects of noise, and minimize the production of carbides and nitric acid caused by arcing.
When semi-conductors, such as transistors, are used for input, reverse voltage is generated and may cause Relays to breakdown.
In most cases it is good to install a surge-absorbing circuit.
Some relays have a built-in surge-absorbing diode (for DC coils). These diodes can also be externally installed.
Comparison of Coil Surges in a 24-VDC Circuit
Comparison of Coil Surges in a 200-VAC Circuit
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page