Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
What should I be aware of when operating MY2 General-purpose Relays with a transistor?
Answer
Model
| Structure | Plug-in terminals |  | |||
| Classification | No. of poles | With indicator | Without indicator | ||
| Coil surge absorbing diode (coil for DC applications only)  | 2 | MY2N-D2 | MY2-D | ||
| 3 | MY3N-D2 | MY3-D | |||
| 4 | MY4N-D2 | MY4-D | |||
| Double | MY4NZ-D2 | MY4Z-D | |||
Note:
1.Make sure that the polarity is correct.
2.The reset time will be longer but it will still be within 20 ms.
3.Diode characteristics:
Withstand inverse voltage: 1,000 V
Forward current: 1 A
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page