Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Can any of MY2 General-purpose Relays switch 10 A at 100 VAC?
Answer
The maximum contact current for MY2 Series is 5 A. Consider using an LY2 Series General-purpose Relays for operation at 10 A.
LY2 Series have the following contact ratings. Switching at 10 A is possible with 110-VAC or 24-VDC resistive loads. If using an inductive load, 7.5 A at 110 VAC or 5 A at 24 VDC can be used.
LY2 Series Contact Ratings (Check whether the specifications are suitable.)
| Type Load | 2 poles | |
| Resistive load | Inductive load (cos Φ = 0.4, L/R = 7 ms) | |
| Contact type | Single | |
| Contact material | AgCdO | |
| Rated load | 110 VAC 10 A 24 VDC 10 A | 110 VAC 7.5 A 24 VDC 5 A |
| Rated carry current | 10 A | |
| Maximum switching voltage | 250 VAC, 125 VDC | |
| Maximum switching current | 10 A | 10 A |
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page