Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Can the PTF08A-E Socket be used with LY1 or LY2 General-purpose Relays?
Answer
Yes, it can be used. When there is an "-E" at the end of the model number, it indicates that Relays have finger protection (i.e., a terminal cover). (Round crimp terminals cannot be used. Use forked crimp terminals.)
Note:When using PTF08A-E, PTF08A, or PT08 with a LY1, connect between sockets terminals 1 and 2, 3 and 4, and 5 and 6 when using over 10 A.
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page