Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Do you have Relays that can hold the contacts?
Answer
MY2K Series Contact Rating (Check whether the specifications are suitable.)
| Load | Resistive load | Inductive load (cos Φ = 0.4, L/R = 7 ms) |
| Rated load | 220 VAC 3 A 24 VDC 3 A | 220 VAC 0.8 A 24 VDC 1.5 A |
| Rated carry current | 3 A | |
| Maximum switching voltage | 250 VAC, 125 VDC | |
| Maximum switching current | 3 A | 3 A |
| Contact mecharism | Single | |
| Contact material | Gold plated + Ag | |
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page