Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
What is the maximum distance for operating MY4 DC24V General-purpose Relays?
Answer
The distance depends on the type and installation conditions of the cable. Both ends of the Relays coil must measure at least 90% of the rated coil voltage to operate without problems. It is essential to check this beforehand.
Reference Information: Guide to Limits of Cable Lengths
| Type | Relay coil | |
| DC Relays | ||
| Preconditions | Must-operate voltage of up to 90% of rated voltage allowed | |
| Calculation of cable length | Symbols |  |
| Formulas |  | |
| Example: For MY4 Relays | 24 VDC MY4 with CVV Cable Answer: The cable needs to be within approx. 4.2 km. | |
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page