Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Is the bounce time included in the operating time and the release time?
Answer
No, bounce time is not included in operating time and release time.
The operating time is the time from when current is applied to the coil, until the NO contacts (make contacts) turn ON.
The release time is the time from when the coil is turned OFF, until the NO contacts turn OFF. For double-pole contacts, it is the time until the NC contacts close.
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page