Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
The terminal arrangement printed on the case of MY General-purpose Relays appears to be reverse compared to the terminal numbers indicated on the Sockets. Is this a mistake?
Answer
No, the terminal numbers on the Relays and the Sockets are the same.
The terminal arrangement printed on the case of the Relays shows a bottom view of the Relays (the side with the terminals). For this reason the arrangement appears to be in reverse. By placing the Relays in the Sockets, the terminal numbers will match.
Applicable model: MY Series
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page