Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
Do you have Relays with overlapping contacts
Answer
Yes, there is G2A-4L32A General-purpose Relays. OMRON calls "overlapping contacts" "MBB (Make Before Break) contacts". (Specify the coil voltage after the model number.)
MBB Contacts (G2A-4L32A)
"MBB contacts" is an abbreviation for Make Before Break contacts. Relays with MBB contacts have an overlapping mechanism where the NO contacts close before the NC contacts open. These are also called "continuous contacts."
Recommended Products
MY
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
LY
Power-switching Compact General-purpose Relays
G3PE (Three-phase)
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.
Other General Purpose Relays FAQ
-
The Relay does not operate even when voltage is applied. Why is this?
-
We were using G2R General Purpose Relay to turn a solenoid valve ON and OFF, and sparks at the contact damaged the relay after only about 3 months of use. What caused this, and what kind of countermeasure is there for it?
-
A Relay burned out. Why is this?
FAQ
Top of page