FAQ02140 of Limit Switches FAQ

SC-series Limit Switch Connectors are available. Select the Connector according to the size of the conduit port and the external diameter of the cable to be used.

Connector for Cabtire Cable

Note:

1.Use SC-21 to SC-25 together with the rubber ring and conduit washer for the SC-P2.

2.It is necessary to use sealing tape with SC Connectors. SC-1M to SC-5M, however, are provided with an O-ring (NBR) and therefore sealing tape is not necessary to ensure a proper seal.

Dimensions and Structure (Unit: mm)

Connectors for Cabtire Cable

SC-P2 accessories and sealing tape must be used together with models without an O-ring in order to prevent ingress of oil or water.

Metal Models without O-ring
G1/2
SC-21 to 25

Metal Models with O-ring
G1/2
SC-1M to 5M

Metal Models without O-ring
1/2-14NPT
(U.S.-standard screws)
SC-1PT to 5PT

Note:Dimensions not shown in the above diagrams have a variation of ±0.4 mm.

*Diameter of Part Marked with Asterisk

Simple Connectors (Not Suitable for Locations Subject to Oil or Water)

Note:The casings for SC-P2, -P3 and -6 are made of resin. If more sealing capability is required, use one of SC-1M to SC-5M, which have metal casings.
Models marked with an asterisk (*) however, can only be used with resin connectors.

Resin Models
G1/2
SC-P2

Resin Models
Pg13.5
SC-P3

Resin Models
G1/2
SC-6

Note:Dimensions not shown in the above diagrams have a variation of ±0.4 mm.

*Diameter of Part Marked with Asterisk

SC-[]F[] FA Connectors

The SC-[]F[] is a snap-on connecting model that greatly reduces the time-consuming effort for wiring the Limit Switch. The SC-[]F[] is easily and quickly connected or disconnected and its degree of protection is IP67.

FA Connectors

Connecting Cables