Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
Question
I measured the output voltage with a tester and it is lower than the rated voltage. Can the output voltage be adjusted?
Answer
Although there are +/- output models that cannot be adjusted, the output from most Power Supplies can be adjusted by turning the voltage output adjuster (V.ADJ).
The voltage will increase when the adjuster is turned clockwise.
The voltage will decrease when the adjuster is turned counterclockwise.
The ranges in which the voltage can be adjusted are as follows:
Voltage Adjustment Ranges (Typical Examples)
| Power Supplies | Voltage adjustment range |
| S82J Series | ±10% |
| S82K Series (except S82K-03012/-03024/-05024) | ±10% |
| S82K-03012/-03024/-05024 | -10% to +15% |
Recommended Products
Other Power Supplies FAQ
-
What factors should be considered when selecting Power Supplies?
-
The output indicator turns ON, but then turns OFF immediately. What is the cause of the problem and solution (in models equipped with the overvoltage protection function)?
-
The output voltage decreased while Power Supplies are in use. What is the cause of the problem and solution?
FAQ
Top of page