Question
How are the internal Solid-state Relays circuits configured?
Answer
Examples of Solid-state Relays Internal Circuit Configuration
Load specifications
AC load
Zero cross function | Isolation | Circuit configuration | Model |
Yes (See note 1.) | Photo- coupler | G3H G3B G3F G3NA (AC input) | |
No | Phototriac | G3NE G3J G3F G3H G3TA-OA | |
Yes (See note 1.) | Phototriac | G3PA-VD G3PB (single phase) G3NA (DC input) G3NE | |
Yes (See note 1.) | Phototriac | G3PB-2(N) (three phases) (See note 2.) | |
Yes (See note 1.) | Phototriac | G3PB-3(N) (three phases) (See note 2.) | |
Yes (See note 1.) | Photo- coupler | G3NA-4[][]B G3NH G3PA-4[][]B G3PB-5[][]B |
Load specifications
DC load
Zero cross function | Isolation | Circuit configuration | Model |
--- | Photo-coupler | G3FD, G3HD G3BD G3TA-OD G3NA-D |
Load specifications
AC/DC load
Zero cross function | Isolation | Circuit configuration | Model |
No | Photo-diode coupler | G3FM |
Note 1:
The zero cross function turns ON the Solid-state Relay when the AC load voltage is 0 V or close to 0 V. Solid-state Relays with the zero cross function are effective in the following ways.
・Clicking noise when a load is turned ON is reduced.
・Effects on the power supply are reduced by suppressing inrush current with loads, such as lamps, heaters, and motors, thereby reducing inrush current protection circuits.
Note 2:
For 200-V models, use a triac on the output switching elements.
New Latching Levers for Circuit Checking Added to Our Best-selling MY General-purpose Relays
Power-switching Compact General-purpose Relays
Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting.