E2J

Long Sensing-distance Capacitive Separate Amplifier Proximity Sensor

E2J

Flat Capacitive Sensor with Separate Amplifier Ideal for Mounting on Robot Hands.

about this Product Family

last update: September 01, 2015

Model		E2J-W10MA	E2J-W20MA
Sensing distance		10 mm	20 mm
Sensing distance adjustable range		4 to 10 mm	8 to 20 mm
Differential travel		15% max. of sensing distance
Detectable object		Conductors and dielectrics
Standard sensing object		Grounded metal plate: 50 × 50 × 1 mm
Response frequency		70 Hz min.
Indicators		Detection indicator (red)
Ambient temperature range		Operating/Storage: -10 to 55°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 85% (with no condensation)
Vibration resistance		Destruction: 10 to 500 Hz, 2-mm double amplitude or 150 m/s² for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 500 m/s² 3 times each in X, Y, and Z directions
Degree of protection		IP66 (IEC)
Connection method		Pre-wired Connector Models (Robotics cable, Standard cable length: 1m)
Weight (packed state)		Approx. 30 g	Approx. 40 g
Materials	Case	Heat-resistant ABS

Model		E2J-JC4A
Power supply voltage		24 VDC ±20%, ripple (p-p): 10% max.
Current consumption		30 mA max.
Control output	Load current	NPN open-collector output, 100 mA max. (30 VDC max.)
Control output	Residual voltage	1 V max.
Indicators		Operation indicator (orange) Power indicator (green)
Number of turns of sensitivity adjustment		8 turns with an indicator
Protection circuits		Load short-circuit protection, Surge suppressor, Reverse polarity protection
Ambient temperature range		Operating/Storage: -10 to 55°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 85% (with no condensation)
Temperature influence (Sensor with Amplifier)		±25% max. of sensing distance at 23°C in the temperature range of 0 to 40°C
Voltage influence		±1% max. of sensing distance at the rated voltage in the ±20% rated voltage range
Insulation resistance		50 MΩ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance		Destruction: 10 to 150 Hz, 1.5-mm double amplitude or 100 m/s² for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 300 m/s² 3 times each in X, Y, and Z directions
Degree of protection		IP50 (IEC)
Connection method		Pre-wired Models (Standard cable length: 2 m)
Weight (packed state)		Approx. 60 g
Materials	Case	ABS
Accessories		Mounting Bracket, Instruction manual

last update: September 01, 2015