Models | EE-SPW321, EE-SPW421 | EE-SPW321-A, EE-SPW421-A | |
---|---|---|---|
Sensing distance | 300 mm | ||
Sensing object | Opaque: 2 mm dia. min. * | ||
Directional angle | 10 ° to 40 ° | ||
Light source | GaAs infrared LED (pulse lighting) with a peak wavelength of 940 nm | ||
Indicator | Light indicator (Red LEDs, one each on Sensor and Amplifier) | ||
Supply voltage | 12 to 24 VDC ±10%, ripple (p-p): 5% max. | ||
Current consumption | Average: 30 mA max. | ||
Control output | NPN open collector, Load power supply voltage: 12 to 24 VDC,
Load current: 100 mA max., OFF current: 0.5 mA max. Residual voltage: 1 V max (at a 100-mA load current) |
||
Response time | 1 ms max. for both detection and reset | ||
Ambient illumination | 3,000 lx max. (incandescent light); 10,000 lx max. (sunlight) on the receiver | ||
Ambient temperature range | - 20 to +55 ° C | ||
Ambient humidity range | 5% to 85% | ||
Vibration resistance | Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 h each in X, Y, and Z directions | ||
Shock resistance | 500 m/s2 | ||
Degree of protection | IEC IP64 | ||
Connecting method | Pre-wired (standard cable length: 2 m) | ||
Cable length from emitter
(receiver) to amplifier |
0.5 m | 1 m | |
Weight (Packaged) | 76 g | ||
Material | Case | ABS resin | |
Lens | Acrylate resin | ||
Accessories | Slits: 0.5 × 3 mm, 1 × 3 mm, 3 × 0.5 mm, 3 × 1 mm (one each)
Sems screws with spring washers and flat washers: Six M2.6 × 12 Instruction Manual |