Item list of D4GS-N
Note: Unless otherwise specified, a tolerance of ±0.4 mm applies to all dimensions. Dimensions in parentheses are
reference values.
reference values.
Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
D4GS-N
Slim Safety Door Switch
Slim Safety Door Switches with IP67 Rating
about this Product Family
Related Contents
- Safety Door Switches
- Features
- Lineup
- Specifications
- Dimensions
- Catalog
last update: September 24, 2015
Caution: All units are in millimeters unless otherwise indicated.
Switches
D4GS-N[]R-[]
Operating characteristics
D4GS-N[]T-[]
Note: There are fluctuations in the contact ON/OFF timing for Switches with multiple poles (2NC, 2NC/1NO, or 3NC).
Confirm performance before application.
Confirm performance before application.
Operation Keys
D4GS-NK1
D4GS-NK2
D4GS-NK4
D4GS-NK4-2
With Operation Key Inserted
D4GS-N[]R-[] + D4GS-NK1
D4GS-N[]T-[] + D4GS-NK1
D4GS-N[]R-[] + D4GS-NK2
D4GS-N[]T-[] + D4GS-NK2
D4GS-N[]R-[] + D4GS-NK4
Note 1. When determining the operation key insertion radius, adjust the adjusting screw so that the tip of the operation
key is positioned to the center of the key insertion hole of the Switch.
2. The operation key cannot be inserted or adjusted in a direction different from the one shown above.
Use the D4GS-NK1 or D4GS-NK2 if necessary.
key is positioned to the center of the key insertion hole of the Switch.
2. The operation key cannot be inserted or adjusted in a direction different from the one shown above.
Use the D4GS-NK1 or D4GS-NK2 if necessary.
D4GS-N[]T-[] + D4GS-NK4
Note 1. When determining the operation key insertion radius, adjust the adjusting screw so that the tip of the operation
key is positioned to the center of the key insertion hole of the Switch.
2. The operation key cannot be inserted or adjusted in a direction different from the one shown above.
Use the D4GS-NK1 or D4GS-NK2 if necessary.
key is positioned to the center of the key insertion hole of the Switch.
2. The operation key cannot be inserted or adjusted in a direction different from the one shown above.
Use the D4GS-NK1 or D4GS-NK2 if necessary.
D4GS-N[]R-[] + D4GS-NK4-2
D4GS-N[]T-[] + D4GS-NK4-2
last update: September 24, 2015
Top of Page