Item list of CK3E
| Product | Specifications | Model | ||
|---|---|---|---|---|
| Memory | Ports | Number of motion axes | ||
| Programmable
Multi-Axis Controller |
Main memory: 1 GB
Flash memory: 1 GB |
Ethernet port: 1
EtherCAT port: 1 |
8 | CK3E-1210 |
| 16 | CK3E-1310 | |||
| 32 | CK3E-1410 | |||
Building Automation
Industrial Automation
Power Automation & Safety
Bangladesh Distributor
CK3E
Programmable Multi-Axis Controller
A controller with a width of only 28.6 mm provides complete control
Contact your OMRON representative for details.
about this Product Family
Related Contents
- Automation Systems
- Multi-Axis Controller
- Features
- Lineup
- Specifications
- Dimensions
- Catalog
last update: August 01, 2016
Optional Hardware
| Product name | Specifications | Model |
|---|---|---|
| USB Flash Drives | Capacity: 2 GB | FZ-MEM2G |
| Capacity: 8 GB | FZ-MEM8G | |
| Power supply | Output voltage: 24 VDC | S8JX-[][][][]24[][] |
Recommended EtherCAT Communications Cables
Use Straight STP (shielded twisted-pair) cable of category 5 or higher with double shielding (braiding and aluminum foil tape) for EtherCAT.
For EtherCAT, use a shielded twisted-pair cable (double shielding with aluminum tape and braiding) of Ethernet category 5 (100BASETX) or higher, and use straight wiring.
For Ethernet, required specification for the communications cables varies depending on the baud rate.
For 100BASE-TX/10BASE-T, use an STP (shielded twisted-pair) cable of Ethernet category 5 or higher. You can use either a straight or cross cable.
For 1000BASE-T, use an STP (double shielding with aluminum tape and braiding) cable of Ethernet category 5e or higher. You can use either a straight or cross cable.
In the table, materials indicated available for Ethernet 100BASE-TX are available for both of 100BASE-TX and 10BASE-T.
Cabel with Connectors
| Item | Appearance | Recom-
mended manu- facturer |
Cable
length (m) |
Model | |
|---|---|---|---|---|---|
| Products
for EtherCAT |
Cable with Connectors on Both Ends
(RJ45/RJ45) Standard RJ45 plugs type *1 Wire Gauge and Number of Pairs: AWG27, 4-pair Cable Cable Sheath material: LSZH *2 Cable color: Yellow *3 |
 |
OMRON | 0.3 | XS6W-6LSZH8SS30CM-Y |
| 0.5 | XS6W-6LSZH8SS50CM-Y | ||||
| 1 | XS6W-6LSZH8SS100CM-Y | ||||
| 2 | XS6W-6LSZH8SS200CM-Y | ||||
| 3 | XS6W-6LSZH8SS300CM-Y | ||||
| 5 | XS6W-6LSZH8SS500CM-Y | ||||
| Cable with Connectors on Both Ends
(RJ45/RJ45) Rugged RJ45 plugs type *1 Wire Gauge and Number of Pairs: AWG22, 2-pair Cable Cable color: Right blue |
 |
OMRON | 0.3 | XS5W-T421-AMD-K | |
| 0.5 | XS5W-T421-BMD-K | ||||
| 1 | XS5W-T421-CMD-K | ||||
| 2 | XS5W-T421-DMD-K | ||||
| 5 | XS5W-T421-GMD-K | ||||
| 10 | XS5W-T421-JMD-K | ||||
| Cable with Connectors on Both Ends
(M12 Straight/M12 Straight) Shield Strengthening Connector cable *4 M12/Smartclick Connectors Wire Gauge and Number of Pairs: AWG22, 2-pair Cable Cable color: Black |
 |
OMRON | 0.5 | XS5W-T421-BM2-SS | |
| 1 | XS5W-T421-CM2-SS | ||||
| 2 | XS5W-T421-DM2-SS | ||||
| 3 | XS5W-T421-EM2-SS | ||||
| 5 | XS5W-T421-GM2-SS | ||||
| 10 | XS5W-T421-JM2-SS | ||||
| Cable with Connectors on Both Ends
(M12 Straight/RJ45) Shield Strengthening Connector cable *4 M12/Smartclick Connectors Rugged RJ45 plugs type Wire Gauge and Number of Pairs: AWG22, 2-pair Cable Cable color: Black |
 |
OMRON | 0.5 | XS5W-T421-BMC-SS | |
| 1 | XS5W-T421-CMC-SS | ||||
| 2 | XS5W-T421-DMC-SS | ||||
| 3 | XS5W-T421-EMC-SS | ||||
| 5 | XS5W-T421-GMC-SS | ||||
| 10 | XS5W-T421-JMC-SS | ||||
*1. Standard type cables length 0.2, 0.3, 0.5, 1, 1.5, 2, 3, 5, 7.5, 10, 15 and 20 m are available.
Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15 m are available.
For details, refer to Cat.No.G019.
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use. Although
the LSZH cable is single shielded, its communications and noise characteristics meet the standards.
*3. Cables colors are available in blue, yellow, or Green.
*4. For details, contact your OMRON representative.
Rugged type cables length 0.3, 0.5, 1, 2, 3, 5, 10 and 15 m are available.
For details, refer to Cat.No.G019.
*2. The lineup features Low Smoke Zero Halogen cables for in-cabinet use and PUR cables for out-of-cabinet use. Although
the LSZH cable is single shielded, its communications and noise characteristics meet the standards.
*3. Cables colors are available in blue, yellow, or Green.
*4. For details, contact your OMRON representative.
Cables / Connectors
| Item | Recommended
manufacturer |
Model | ||
|---|---|---|---|---|
| Products for EtherCAT
or Ethernet (1000BASE-T/ 100BASE-TX) |
Wire Gauge and Number
of Pairs: AWG24, 4-pair Cable |
Cables | Hitachi Metals, Ltd. | NETSTAR-C5E SAB 0.5
× 4P *1 |
| Kuramo Electric Co. | KETH-SB *1 | |||
| SWCC Showa Cable
Systems Co. |
FAE-5004 *1 | |||
| RJ45
Connectors |
Panduit Corporation | MPS588-C *1 | ||
| Products for EtherCAT
or Ethernet (100BASE-TX) |
Wire Gauge and Number
of Pairs: AWG22, 2-pair Cable |
Cables | Kuramo Electric Co. | KETH-PSB-OMR *2 |
| JMACS Japan Co., Ltd. | PNET/B *2 | |||
| RJ45 Assembly
Connector  |
OMRON | XS6G-T421-1 *2 | ||
| Products for Ethernet
(100BASE-TX) |
Wire Gauge and Number
of Pairs: 0.5 mm, 4-pair Cable |
Cables | Fujikura Ltd. | F-LINK-E 0.5mm × 4P
*3 |
| RJ45
Connectors |
Panduit Corporation | MPS588 *3 | ||
*1. We recommend you to use above cable for EtherCAT and Ethernet, and RJ45 Connector together.
*2. We recommend you to use above cable for EtherCAT and Ethernet, and RJ45 Assembly Connector together.
*3. We recommend you to use above cable For Ethernet and RJ45 Connectors together.
Note: Connect both ends of cable shielded wires to the connector hoods.
Support Software
The following table shows the Support Software used to configure, monitor, program, and debug the Programmable Multi-Axis Controller.
| Software Name | Application | How to Procure | |
|---|---|---|---|
| Power PMAC IDE * | This computer software is used to configure
the Controller, create user programs, and debug the programs. |
This is free software.
Contact your OMRON representative for information on how to procure. |
|
| Power PMAC
NC16 |
Power PMAC-NC16
SDK |
This computer software is used to control
working machines and other CNC machines with the Controller. Use this software when you want to customize the HMI screen. The product contains extension source codes used for customization. |
This is non-free software.
Contact your OMRON representative for information on how to procure. |
| Power PMAC-NC16
Runtime |
This computer software is used to control
working machines and other CNC machines with the Controller. Use this software when you do not customize the HMI screen. |
This is non-free software.
Contact your OMRON representative for information on how to procure. |
|
| EC Engineer | This computer software is used to configure
and monitor the EtherCAT network by using the Controller as the EtherCAT master. |
This is free software.
Contact your OMRON representative for information on how to procure. |
|
Note: PMAC is an abbreviation for Programmable Multi Axis Controller.
* Power PMAC IDE version 2.2 or higher.
last update: August 01, 2016
Top of Page