K8DT-VS

Control Panels: The Heart of Manufacturing Sites.
Evolution in control panels results in large evolution in production facilities.
And if control panel design, control panel manufacturing processes, and human interaction with them are innovated, control panel manufacturing becomes simpler and takes a leap forward.
OMRON will continue to achieve a control panel evolution and process innovation through many undertakings starting with the shared Value Design for Panel *1 concept for the specifications of products used in control panels.

*1 Value Design for Panel

Our shared Value Design for Panel (herein after referred to as "Value Design") concept for the specifications of products used in control panels will create new value to our customer’s control panels.
Combining multiple products that share the Value Design concept will further increase the value provided to control panels.

1. Alarms do not occur before equipment is damaged.
2. Protection is necessary because of poor power supply quality
     overseas.
3. Preventing excessive temperature increases in heaters is
     necessary.
4. Control panels for electrode-based water level control must
     be downsized.
5. Measuring and Monitoring Relays that conform to international
     safety standards are necessary.

[Input signal*] A voltage, current, temperature (thermocouple or platinum resistance thermometer), or water level
                         (electrode) can be input.

[Alarm output] You can select a relay or transistor output.

*There are different models for different inputs.

*According to OMRON investigation in November 2015.

The operating frequency of Measuring and Monitoring Relays is low, which means the surfaces of relay contacts can deteriorate and reduces reliability. Particularly for microcomputer board and PLC inputs, a microcurrent of 5 mA or less for switching reliability is required, making transistor outputs superior.

A lower power consumption means that internal heat generation is suppressed, which enables side-by-side mounting.

• The slim body is only 17.5 mm wide to enable control panel downsizing.
• To simplify wiring, Push-In Plus terminal blocks are positioned at the front.
• To simplify changing settings, the setting switches were placed on the front.

*Information for Push-In Plus and screw terminal blocks is based on OMRON's actual measurement value data.

You can insert wires with pin terminals or ferrules, or you can also insert solid wires or stranded wires.

[Application]  Ideal for monitoring for error trends in motors and other equipment
                         (e.g., equipment with three-phase motors, expensive equipment, and equipment with compressors).
[Features]      High reliability for worry-free application.