Page top

Building Automation


Industrial Automation


Power Automation & Safety

Bangladesh Distributor

HL-5000

General-purpose Limit Switch

HL-5000

Economical, Miniature Limit Switch Boasting Rigid Construction

Item list of HL-5000

about this Product Family

Related Contents

last update: September 24, 2012

Ratings

Rated voltage Non-inductive load (A) Inductive load (A)
Resistive load Lamp load Inductive load Motor load
NC NO NC NO NC NO NC NO
125 VAC
250 VAC 		5
5		 1.5
1		 0.7
0.5		 3
3		 2
1.5		 1
0.8
12 VDC
24 VDC
125 VDC
250 VDC 		5
5		 3
3		 4
4		 3
3
0.4
0.4		 0.2
0.2		 - - -

Note: 1. The above figures are for steady-state currents.
           2. Inductive loads have a power factor of 0.4 min. (AC) and a time constant of 7 ms max. (DC).
           3. Lamp load has an inrush current of 10 times the steady-state current.
           4. Motor load has an inrush current of 6 times the steady-state current.

Inrush current NC 24 A max.
NO 12 A max.

Characteristics

Degree of protection IP65
Durability * Mechanical 10,000,000 operations min. (under rated conditions)
Electrical See the following Electrical Durability.
Operating speed 5 mm/s to 0.5 m/s
Operating frequency Mechanical 120 operations/min
Electrical 30 operations/min
Insulation resistance 100 MΩ min. (at 500 VDC)
Contact resistance 25 mΩ max. (initial value)
Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between terminals of the same polarity
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground
1,500 VAC, 50/60 Hz for 1 min between each terminal and non-current-carrying metal part
Rated frequency 50/60 Hz
Vibration resistance Malfunction 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance Destruction 1,000 m/s2 max.
Malfunction 300 m/s2 max.
Ambient operating temperature -5°C to +65°C (with no icing)
Ambient operating humidity 35% to 95%RH
Weight Approx. 130 to 190 g

Note: 1. The above figures are initial values.
           2. The above characteristics may vary depending on the model. For further details, contact your OMRON sales
                representative.
* The values are calculated at an operating temperature of +5°C to +35°C, and an operating humidity of 40% to 70%RH.
  Contact your OMRON sales representative for more detailed information on other operating environments.

last update: September 24, 2012

Product Category

Site Information

© Copyright Kyoto Engineering & Automation Ltd. All Rights Reserved.