WL-N / WLM-N

Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.

Basic, High-sensitivity*1, and High-precision Switches*1

Basic
    WLCA2-N
    WLCA2-2-N
    WLCA2-2N-N
High-sensitivity*1
    (WLG2-N)
High-precision*1
    (WLGCA2-N)

The only difference in the shape for High-sensitivity and High-precision Switches is the set position marker plate. *1

Basic 
  WLCA2-7-N

Basic 
  WLCA2-8-N

Basic
  WLCA12-N
  WLCA12-2-N 
  WLCA12-2N-N
High-sensitivity*1
  (WLG12-N)

Only the external appearance of the set position indicator plate varies on high-sensitivity models. *1

*1. Manufacturing of the high-sensitivity, high-precision models has been discontinued and the models have been integrated into the WL Series.
This information is provided as reference for comparison of specifications. Refer to the model replacement table on catalog and order WL series high-sensitivity or high-precision models.
*2. The operating characteristics for WLCA12-N, WLCA12-2-N, WLCA12-2N-N, and WLG12-N are measured at the lever length of 38 mm.

Basic
  WLCL-N
  WLCL-2-N
  WLCL-2N-N
High-sensitivity *1
  (WLGL-N)

Only the external appearance of the set position indicator plate varies on high-sensitivity models. *1

Basic 
  WLCAL4-N

Basic 
  WLCAL5-N

Protective Switches
  WLCA32-41-N
  WLCA32-42-N
  WLCA32-43-N
  WLCA32-44-N

The WLCA32-41-N is shown in the following diagram.

Note: The actuator on the WLCAL4-N and WLCAL5-N is heavy, which may result in resetting problems depending on
           the direction the Switch is mounted. Mount the Switch so that the actuator is facing downwards to prevent this
           problem from occurring.
*1. Manufacturing of the high-sensitivity, high-precision models has been discontinued and the models have been integrated into the WL Series.
This information is provided as reference for comparison of specifications. Refer to the model replacement table on catalog and order WL series high-sensitivity or high-precision models.
*2. The operating characteristics for WLCL-N, WLCL-2-N, WLCL-2N-N, and WLGL-N are measured at the lever length of 140 mm.
*3. The operating characteristics of WLCAL4-N are measured at a rod length of 380 mm.

Switches with Plunger Actuators

WLD18-N

WLSD-N

WLD28-N

WLSD2-N

WLD38-N

WLSD3-N

WLD2-N

Basic Switches

WLNJ-N

WLNJ-2-N

WLNJ-S2-N

* These values are for the top end of the spring, rod, or wire.

(For details about applicable cables, refer to Connecting Sensor I/O Connectors Cable and Socket on Catalog.)

Basic Switches
  WLCA2-LDK13-N
High-sensitivity Switches *
  (WLG2-LDK13-N)
High-precision Switches *
  (WLGCA2-LDK13-N)

The only difference in the shape for High-sensitivity and High-precision Switches is the set position marker plate.*

Basic Switches
  WLCA2-LD-M1J-N
High-sensitivity Switches *
  (WLG2-LD-M1J-N)
High-precision Switches *
  (WLGCA2-LD-M1J-N)

The only difference in the shape for High-sensitivity and High-precision Switches is the set position marker plate.*

Note: The following diagrams are for a indicator-equipped models.

* Manufacturing of the high-sensitivity, high-precision models has been discontinued and the models have been integrated into the WL Series.
This information is provided as reference for comparison of specifications. Refer to the model replacement table on catalog and order WL-series high-sensitivity or high-precision models.

WLCA2-LD-N
WLCA2-LE-N

Basic Switches
  WLCA2-[]S-N
High-sensitivity Switches *
  (WLG2-[]S-N)
High-precision Switches *
  (WLGCA2-[]S-N)

WLCA2-[]S-M1J-1-N

WLD28-[]S-N

Note: The above diagrams are for Indicator-equipped Switches.

* Manufacturing of the high-sensitivity, high-precision models has been discontinued and the models have been integrated into the WL Series.
This information is provided as reference for comparison of specifications. Refer to the model replacement table on catalog and order WL-series high-sensitivity or high-precision models.

Basic Switches
    WLMCA2-LD-N
High-sensitivity Switches *
    (WLMG2-LD-N)
High-precision Switches *
    (WLMGCA2-LD-N)

Basic Switches
  WLMCA2-LDK13-N
High-sensitivity Switches *
  (WLMG2-LDK13-N)
High-precision Switches *
  (WLMGCA2-LDK13-N)

Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
      2. The above diagrams are for Indicator-equipped Switches.

* Manufacturing of the high-sensitivity, high-precision models has been discontinued and the models have been integrated into the WL Series.
This information is provided as reference for comparison of specifications. Refer to the model replacement table on page 45 and order WL-series high-sensitivity or high-precision models.

Lever: Only rotating lever models are illustrated.

WL-1A100
Standard Lever

WL-1A115
Resin Roller

WL-1A400
Bearing Roller

WL-1A118
Nylon Roller:
Roller Width: 30 mm

WL-1A103S
Spatter Prevention

WL-1A200
Lever Length: 50
Roller Width: 15

WL-1A300
Lever Length: 63

WL-2A100

WL-2A111
Resin Roller

WL-2A107
Double Nuts

WL-2A108
Resin Roller

WL-2A122

WL-2A106

WL-2A130

WL-2A104

WL-2A110

WL-2A105

WL-1A106

WL-1A110

WL-4A100

WL-4A201

WL-3A100

WL-3A106
Double Nut

WL-3A108

WL-3A200

WL-3A203

WL-4A112

WL-2A129

WL-5A101

WL-5A100 has a plastic roller

WL-5A103

WL-5A102 has a plastic roller

WL-5A105

WL-5A104 has a plastic roller

Note: When using the adjustable roller (rod) lever, make sure that the lever is facing downwards.
           Use caution, as telegraphing (the Switch turns ON and OFF repeatedly due to inertia) may occur.