Item list of ZJ-FW
| Item | ZJ-FW013 | ZJ-FW029 | ZJ-FW053 |
|---|---|---|---|
| Power supply voltage | 24 V DC±10%, Ripple (p-p): 10% | ||
| Current consumption | 0.9 A max | 1.2 A max | 3.0 A max |
| Discharge voltage | ±7.5 kV | ||
| Discharge method | Variable DC | ||
| Ionization time * | 1.5 s | 1 s | |
| Ion balance * | ±10 V max. | ||
| Amount of ozone generated | 0.01 ppm (Measured at a distance of 50 mm from air outlet) | ||
| Indicators | Power (Green), Fan running (Green), Cleaning (Yellow), Alarm (Red) | ||
| Main functions | Ion balance adjustment (Automatic and manual) | ||
| External output
(for both cleaning and alarm outputs) |
Photo MOS relay output (NPN or PNP)
• Applied voltage: 30VDC max., load current: 100mA max. • Residual voltage: 1V max |
||
| Discharge stop input | No-voltage contact input
• ON: 0V short circuit • OFF: Open (leakage current: 0.1mA max.) |
||
| Ambient temperature range | 0 to 50°C (No icing or dewing) | ||
| Ambient humidity range | 35% to 65% (No icing or dewing) | ||
| Weight (Packaged) | Approx. 0.6 kg (Approx. 1.2 kg) | Approx. 1 kg (Approx. 1.8 kg) | Approx. 2 kg (Approx. 3 kg) |
| Material | Body:Aluminum, ABS Electrode needle: Tungsten | ||
| Accessories | Instruction sheet, I/O
connector, L-mounting bracket, Streamer |
Instruction sheet, I/O connector, Stand, Streamer | |
* Typical default settings at the time of shipping from the factory
• Measurement conditions Measurement point and distance: 300 mm from body center, Airflow: Max, Plate monitor:
150 x 150 mm, 20 pF
• Ionization time: Time required to lower the charge from ±1000 V to ±100 V
• Ion balance measurement time: 10 s
• Measurement conditions Measurement point and distance: 300 mm from body center, Airflow: Max, Plate monitor:
150 x 150 mm, 20 pF
• Ionization time: Time required to lower the charge from ±1000 V to ±100 V
• Ion balance measurement time: 10 s
Top of Page