FJ-SCG/SG | FJ-SC2MG/S2MG | FJ-SC5MG/S5MG | ||
---|---|---|---|---|
Imaging element | Progressive scan 1/3-inch
CCD |
Progressive scan 1/1.8-inch
CCD |
Progressive scan 2/3-inch
CCD |
|
Effective pixels | 656 (H) × 492 (V): Color | 1616 (H) × 1234 (V): Color | 2448 (H) × 2056 (V): Color | |
656 (H) × 494 (V):
Monochrome |
1616 (H) × 1236 (V):
Monochrome |
2448 (H) × 2058 (V):
Monochrome |
||
Pixel size | 7.4 (μm) × 7.4 (μm) | 4.4 (μm) × 4.4 (μm) | 3.45 (μm) × 3.45 (μm) | |
Synchronous system | Internal synchronous | |||
Frame rate | 90fps | 20fps | 17fps | |
Number of uptake lines | Min 2 line to Effective pixels (V) (2 lines interval) | |||
Gain | 0dB to +25dB | 0dB to +18dB | 0dB to +14dB | |
Shutter speed | 17 μs to 1 s | 25 μs to 1 s | 29 μs to 10 s | |
Video output | Digital 8 bit | |||
Trigger input | External trigger/Software trigger (Ethernet) | |||
External output | Strobe trigger/Trigger READY | |||
I/F | Gigabit Ethernet (1 Gbit/s) | |||
Lens mount | C mount | |||
Power voltage | PoE/12 VDC±10% | 11.3 to 13.2 VDC | ||
Pick-up voltage
when camera cable FJ-VSP is used |
3 m | 11.3 to 13.2 VDC | 11.8 to 13.8 VDC | |
5 m | ||||
10 m | Cannot be used. | |||
Power consumption | PoE supply: 3.6 W | PoE supply: 3.8 W | Power and I/O connector
supply: 6.4 W |
|
Power and I/O connector
supply: 3.1 W |
Power and I/O connector
supply: 3.2 W |
|||
Vibration resistance | 10 to 150 Hz, Half amplitude 0.35 mm (Acceleration: Max. 50 m/s2), 3 directions (X/Y/Z) 8
minutes each, 10 times |
|||
Impact resistance | 150 m/s2, 6 directions (Up and Down, Right and Left, Back and Forth) 3 times each | |||
Ambient temperature | In operation: 0 to 40°C (Chassis surface temperature should be 55°C or lower.) | |||
In storage: -25 to +65°C (no freezing or condensation) | ||||
Ambient humidity | In operation and storage: 35 to 85% RH each (no condensation) | |||
Ambient environment | No corrosive gas | |||
Protective structure | IEC60529 standard IP30 | |||
Weight | Approx. 90 g | Approx. 220 g |